[asterisk-users] hangup not detected?

[Warren Selby]

On Fri, May 18, 2012 at 12:00 PM, Justin Killen <
jkillen at allamericanasphalt.com> wrote:

>  I have and automated call-in dispatch system where hundreds of people
> call in daily for 2-3 minutes each.  The extension is set up to get their
> information, then text-to-speech the dispatch information (via odbc).  It
> then loops 5 times then ends the call.  These calls are being handled by an
> 8 port analog digium card.  ****
>
> ** **
>
> Sometimes though, I see calls via ‘core show channel dahdi/1-1’ that have
> a time of > 16 hours.  I’m not sure if this is a result of dahdi missing
> the hangup, ODBC timing out, or TTS failing for some reason.  When a
> channel gets in this state, the call doesn’t seem to progress through the
> dialplan, they always display the TTS line.  Doing a ‘dahdi destroy channel
> 1-1’ doesn’t seem to be effective – the only way I’ve been able to clear
> the calls is to do a ‘dahdi restart’ and/or restart the asterisk service.*
> ***
>
> ** **
>
> For TTS I’m using cepstral with the Swift wrapper.****
>
> ** **
>
> Here is a snippet of my dialplan:****
>
> ** **
>
>
Can you post the CLI output of a call that gets "hung"?  I'd like to see
where it's hanging on.

Also, as a work-around to attempt to solve the symptom and not the
underlying issue, you could maybe setup a cron job that runs once every ten
minutes that checks for stale calls using AMI, and then hangs up any calls
up that are over 10 minutes long?  Using the AMI Hangup command?


-- 
Thanks,
--Warren Selby, dCAP
http://www.SelbyTech.com <http://www.selbytech.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120521/ed182cf6/attachment.htm>