[asterisk-users] Asterisk pickup call on first ring

[Satria Anamarta]

Hi Eric,
By saying "signalling" do you also mean a caller id signalling?

Thanks :)

On 6/2/12, Eric Wieling <EWieling at nyigc.com> wrote:
> This is incorrect.  The vast majority of settings in chan_dahdi.conf are
> applied when you do a module reload chan_dahdi.so
>
> You cannot change signaling, switchtype, or add or remove channels (I'm sure
> there are a few others) on a module reload, but most settings will be
> applied on a reload.
>
> If you have no active dahdi channels you can usually you can do a module
> unload chan_dahdi.so and a module load chan_dahdi.so to totally reload dahdi
> without restarting your PBX.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mitul Limbani
> Sent: Saturday, June 02, 2012 12:55 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Asterisk pickup call on first ring
>
> Any changes inside chan_dahdi requires asterisk restart.
>
> you can restart asterisk gracefully, where by asterisk will honor the
> existing calls, but wont honor new calls till it restarts.
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
Sent from my mobile device