[asterisk-users] Remote party ID - sort of working...

[Eric Wieling]

Why would you NOT want the connectedline info sent immediately?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Richard Mudgett
Sent: Wednesday, July 18, 2012 12:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Remote party ID - sort of working...

> I’m trying to set my system to set a caller id using the diaplan when 
> calling an internal extension. In other words, when I dial Joe Smith’s 
> extension I want my own phone to show “Joe Smith 555”. I have sort of 
> managed that in the sense that my phone shows Joe Smith’s caller id 
> based on his sip.conf callerid. But I need this to be done 
> programmatically through the dial plan (Let’s say I want to show “Joe 
> Smith” or just “Joe” based on some condition)
> 
> 
> 
> I have this in the relevant dialplan snippet:
> 
> 
> 
> exten => 123,1,Verbose(1,Test)
> exten => 123,n,Set(CONNECTEDLINE(number,i)="555-555-5555")
> exten => 123,n,Set(rclidname="TestingB <123-444-5555>")

This line is just setting an ordinary channel variable.
What do you think is supposed to use this value?

> exten => 123,n,Set(CONNECTEDLINE(pres)=allowed)
> exten => 123,n,Set(CONNECTEDLINE(name,i)="Testing")

Please read about usage of the ,i in [1].  If anything you should have the ,i on *all* of the CONNECTEDLINE lines *except* the last one before a Dial.

> exten => 123,n,Set(CONNECTEDLINE(pres)=allowed)
> exten => 123,n,Dial(SIP/joesmithpolycomphone,20)

Since you are not using the 'I' option on Dial here, your preset CONNECTEDLINE information is being overwritten by what is sent by SIP/joesmithpolycomphone when it answers.

> exten => 123,n,Hangup()
> 
> 
> 
> I am always seeing remotepolycomphone’s callerid number and name as 
> entered in sip.conf, not “Testing 555-555-5555”, neither am I seeing 
> “TestingB <123-444-5555>”.
> 
> 
> 
> What am I missing for it for accept my dialplan remote-id name and 
> number?

[1] https://wiki.asterisk.org/wiki/display/AST/Manipulating+Party+ID+Information

Richard

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users