[asterisk-users] Trixbox or FreePBX or Elastix or PBX In a Flash

[Eric Wieling]

Recent Polycom firmware versions (4.x, I think) also have support for "user" sort of stuff.  See the 4.x Admin Guide.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P. Fleming
Sent: Tuesday, July 10, 2012 3:02 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Trixbox or FreePBX or Elastix or PBX In a Flash

On 07/10/2012 01:50 PM, Carlos Alvarez wrote:

> On Tue, Jul 10, 2012 at 11:46 AM, Kevin P. Fleming 
> <kpfleming at digium.com <mailto:kpfleming at digium.com>> wrote:
>
>     This can be done using Digium phones; they have built-in support for
>     selecting which 'user' they should be when they are reconfigured.
>     It's slightly more complicated than a simple login/logout because it
>     requires rebooting the phone, but it's there and it works. They even
>     support the case where a user has a phone at their house, but comes
>     into the office and 'steals' their extension away from the house
>     phone; the house phone will then go into an automatic
>     reconfiguration state and wait for someone tell it which extension
>     it should 'be'... when the user returns home, they can 'steal' the
>     extension back from the office.
>
>
> Unfortunately, telling them to dump 50-some Polycom phones that still 
> work is a tough one.  Not impossible though.  So if I understand 
> correctly, the user reboots the phone when he arrives, and goes into 
> the configure mode?  Is it end user friendly, or complex?  I still 
> don't have a server with the Digium phone module on it to test.

That's basically it, yes. I just did this on my D70:

* Press Menu, select Restart, press Yes.
* During the restart, while the progress bar is progressing, push a key. 
This results in 'Reconfiguration enabled' on the screen.
* When the server list appears, choose one (if there is only one server, this will be skipped).
* Choose a user from the user list and enter the PIN for it; alternatively, if a global PIN is required by the server, it will need to be entered before the user list will be displayed.
* Wait for the phone to configure itself.

This takes about 60 seconds.

--
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com & www.asterisk.org



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users