[asterisk-users] after upgrade from 1.4.26.2 to 1.8.11.0 my provider gets rport instead of port

giovanni.v iax at keybits.org
Thu Jul 5 10:22:32 CDT 2012


Il 05/07/2012 16.43, gincantalupo ha scritto:
> here's my sip.conf, but unfortunately I cannot make some other tests
> with Asterisk 1.8 since the PBX is in production now with Asterisk
> 1.4.26.2 which seems to work very fine.

I'm using the same provider on many sites without special issues.
My sip.conf follows, tested time ago on 1.4, ported with minor changes 
to 1.6.2 (now in production) then ported to 1.8 without changes (lab 
test only).

[general]
context=public-direct-dialin
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
useragent=TeeBX
alwaysauthreject=yes
videosupport=no
notifybusy=yes
counteronpeer=yes
notifyhold=no
pedantic=yes
callcounter=yes
defaultexpiry=120
minexpiry=60
maxexpiry=3600
localnet=172.31.255.0/24
localnet=172.31.254.0/24

; MCLink
register => username:pass at psip1.mclink.it/username

[mclink-06xxxxx]
type=peer
defaultuser=username
secret=pass
fromuser=username
host=psip1.mclink.it
context=mclink-06xxxxx-incoming
fromdomain=psip1.mclink.it
language=it-it
nat=yes
qualify=2000
directmedia=no
insecure=port,invite
dtmfmode=rfc2833
disallow=all
allow=alaw
allow=gsm
call-limit=5



More information about the asterisk-users mailing list