[asterisk-users] ChanSpy : how to know channel name ?
Jonas Kellens
jonas.kellens at telenet.be
Tue Jan 24 09:52:08 CST 2012
Hello,
there is very little information about the function CHANNELS().
If I know the peer name (that I always know for sure), do you see a way
of using the function CHANNELS() to get the right channel ??
If CHANNELS() gives a "space-delimited" list of active channels, and I
know miq8... how can I get /SIP/miq8-00002419/ ?
Thanks !
On 01/24/2012 04:46 PM, Danny Nicholas wrote:
>
> Extenspy(miq8 at default) for miq8. I would either proceed under the
> assumption that I'm going to be listening to my extensions in the
> default context or set up an AGI or something to load my needed
> ext at context information.
>
> *From:*asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas
> Kellens
> *Sent:* Tuesday, January 24, 2012 9:41 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
>
> Hello,
>
> how to use ExtenSpy(extension at context) when conversations are named
> like this ? :
>
> /SIP/*378680644-00002* default
> SIP/*rs4-00002445* sub-uitinternation
> SIP/*3715320168-00002* default
> SIP*/ibenla2-0000244* sub-uit789
> SIP/*372083610-00002* default
> SIP/*cedhou0-000024* sub-uit789
> SIP*/travel3-00002* pbx-routing
> SIP/*INTELin-00002* pbx-routing
> SIP/*375382280-00002* default
> SIP/*miq8-00002419* sub-uitGSM
> SIP/*3749378004-0000* default
> SIP*/instlpr0-00002* sub-uitinternation
> /
> Can you tell me what is the extension ? How will I know the context ?
> The context is not always the same...
>
>
>
> On 01/24/2012 04:32 PM, Danny Nicholas wrote:
>
> You are either going to be able to listen to SIP/miq8 or you are going
> to have to know the sequence number like SIP/miq8-00001. Maybe you
> should just use ExtenSpy instead?
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas
> Kellens
> *Sent:* Tuesday, January 24, 2012 9:26 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
>
> Of course I can control the name of my SIP-peer. Why do you tell me
> this ?!
>
> Please answer my question : how do I know the channel name so I can
> ChanSpy the correct channel ?
>
>
>
> On 01/24/2012 04:13 PM, Danny Nicholas wrote:
>
> It's not random. The "Channel Name" is Tech/peer-sequence (sequence
> is in hex). You can control (to a degree) the peer portion in
> sip.conf/users.conf.
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas
> Kellens
> *Sent:* Tuesday, January 24, 2012 9:07 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
>
> Hello,
>
> thanks. miq8 is the name of the SIP peer account.
>
> So when I know the SIP peer name, and I strip of the numbers of the
> channel, then I can use ChanSpy. So this answers my original question.
>
> The only problem I see : it is Asterisk that gives the channel its
> name. How do I change this ??
>
> As far as I know, Asterisk randomly gives a channel name which
> consists of the technology (SIP), the peername (miq8) and some numbers...
>
> How to change the channel name ?
>
>
>
> On 01/24/2012 03:53 PM, Danny Nicholas wrote:
>
> I would try chanspy(sip/miq8,b) -- the b flag denotes to only listen
> to a bridged call which (it seems to me) should pick up both sides.
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas
> Kellens
> *Sent:* Tuesday, January 24, 2012 8:46 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] ChanSpy : how to know channel name ?
>
> Hello,
>
> OK thanks. But, I want to listen to the conversation (not just 1
> channel out of 2 channels). How then do I use ChanSpy ?
>
>
>
> On 01/24/2012 03:41 PM, Danny Nicholas wrote:
>
> Strip off the --xxxxx. Just listen to SIP/miq8 and SIP/375382280 in
> your example.
>
> *From:*asterisk-users-bounces at lists.digium.com
> <mailto:asterisk-users-bounces at lists.digium.com>
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas
> Kellens
> *Sent:* Tuesday, January 24, 2012 7:47 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] ChanSpy : how to know channel name ?
>
> Hello list,
>
> to use ChanSpy, one needs to know the name of the channel.
>
> But on an incoming call from the provider, or an outgoing call to the
> provider there are always numbers added. How can one then know the
> channel name ??
>
> /core show channels verbose/ shows me for example :
>
> /SIP/*378680644-00002* default
> SIP/*rs4-00002445* sub-uitinternation
> SIP/*3715320168-00002* default
> SIP*/ibenla2-0000244* sub-uit789
> SIP/*372083610-00002* default
> SIP/*cedhou0-000024* sub-uit789
> SIP*/travel3-00002* pbx-routing
> SIP/*INTELin-00002* pbx-routing
> SIP/*375382280-00002* default
> SIP/*miq8-00002419* sub-uitGSM
> SIP/*3749378004-0000* default
> SIP*/instlpr0-00002* sub-uitinternation
> SIP/*372089170-00002* default
> SIP/*v9q9uLT-0000* from-GFATRUNK
> 46 active channels
> 24 active calls/
>
>
> If I want to listen to the conversation of /SIP/*miq8-00002419*/ and
> /SIP/*375382280-00002*/ (these 2 channels have been connected to 1
> conversation), how do I use ChanSpy ??
>
>
>
> Kind regards;
> Jonas.
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120124/3263b123/attachment.htm>
More information about the asterisk-users
mailing list