[asterisk-users] TE410P (1st) without cables always green

Marcio Gomes mpglista at microlink.com.br
Tue Feb 7 04:23:53 CST 2012 

Helo,

I am upgrading a linux box ( Slackware + asterisk 1.0 + zaptel 0.9 ) to 
new asterisk 1.8 + dahdi.

- In old softwares versions the box is working well.

- After upgrade to slackware 13.37 + dahdi ( 2.3.X to SVN ) + asterisk , 
before asterisk is loaded and PRI/E1 Cables ( Span 1/2 ) + T1 ( Span 3/4 
for Addtran channels banks ) ,
all Spans are in OK ( Green ) mode.

- I go to another developer box, and the same problems cames up, is very 
dificult for me work in the productions box ( only 02:00 am to 04:00 am ).

- Follwing my developer box setup :

1) System.conf  ( I am working at this time with only 1 spam )

span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

loadzone        = us
defaultzone     = us


2)
modprobe wct4xxp debug=3
root at zap4:~# dahdi_cfg -v
DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

31 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to mg2
Setting echocan for channel 13 to mg2
Setting echocan for channel 14 to mg2
Setting echocan for channel 15 to mg2
Setting echocan for channel 16 to none
Setting echocan for channel 17 to mg2
Setting echocan for channel 18 to mg2
Setting echocan for channel 19 to mg2
Setting echocan for channel 20 to mg2
Setting echocan for channel 21 to mg2
Setting echocan for channel 22 to mg2
Setting echocan for channel 23 to mg2
Setting echocan for channel 24 to mg2
Setting echocan for channel 25 to mg2
Setting echocan for channel 26 to mg2
Setting echocan for channel 27 to mg2
Setting echocan for channel 28 to mg2
Setting echocan for channel 29 to mg2
Setting echocan for channel 30 to mg2
Setting echocan for channel 31 to mg2

3) dahdi_scan

  dahdi_scan |more
[1]
active=yes
alarms=OK  =================================> Here is the proble, the 
span is without cables.
description=T4XXP (PCI) Card 0 Span 1
name=TE4/0/1
manufacturer=Digium
devicetype=Wildcard TE410P/TE405P (1st Gen)
location=Board ID Switch 0
basechan=1
totchans=31
irq=20
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS

4) dmesg , I put some informantion in bold.

dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
Found TE4XXP at base address e9100000, remapped to f895a000
DMA memory base of size 4096 at f6513000.  Read: f6513800 and Write f6513000
TE4XXP version c01a009b, burst OFF
card 0: FALC framer is v2.1 or earlier.
FALC version: 00000005, Board ID: 00
Reg 0: 0x36513800
Reg 1: 0x36513000
Reg 2: 0x07fc07fc
Reg 3: 0x00000000
Reg 4: 0x00000000
Reg 5: 0x00000000
Reg 6: 0xc01a009b
Reg 7: 0x00001300
Reg 8: 0x010200ff
Reg 9: 0x00fd0000
Reg 10: 0x0000004a
*IRQ 20/wct4xxp: IRQF_DISABLED is not guaranteed on shared IRQs
wct4xxp 0000:05:00.0: Enabled 1sec error counter interrupt
wct4xxp 0000:05:00.0: Enabled errored second interrupt
wct4xxp 0000:05:00.0: Enabled 1sec error counter interrupt
wct4xxp 0000:05:00.0: Enabled errored second interrupt
wct4xxp 0000:05:00.0: Enabled 1sec error counter interrupt
wct4xxp 0000:05:00.0: Enabled errored second interrupt
wct4xxp 0000:05:00.0: Enabled 1sec error counter interrupt
wct4xxp 0000:05:00.0: Enabled errored second interrupt
*Found a Wildcard: Wildcard TE410P/TE405P (1st Gen)
TE4XXP: Launching card: 0
TE4XXP: Setting up global serial parameters
Successfully initialized serial bus for unit 0
Successfully initialized serial bus for unit 1
Successfully initialized serial bus for unit 2
Successfully initialized serial bus for unit 3
About to enter spanconfig!
TE4XXP: Configuring span 1
Done with spanconfig!
TE4XXP: Configured channel 1 (TE4/0/1/1) sigtype 128
dahdi_echocan_mg2: Registered echo canceler 'MG2'
TE4XXP: Configured channel 2 (TE4/0/1/2) sigtype 128
TE4XXP: Configured channel 3 (TE4/0/1/3) sigtype 128
TE4XXP: Configured channel 4 (TE4/0/1/4) sigtype 128
TE4XXP: Configured channel 5 (TE4/0/1/5) sigtype 128
TE4XXP: Configured channel 6 (TE4/0/1/6) sigtype 128
TE4XXP: Configured channel 7 (TE4/0/1/7) sigtype 128
TE4XXP: Configured channel 8 (TE4/0/1/8) sigtype 128
TE4XXP: Configured channel 9 (TE4/0/1/9) sigtype 128
TE4XXP: Configured channel 10 (TE4/0/1/10) sigtype 128
TE4XXP: Configured channel 11 (TE4/0/1/11) sigtype 128
TE4XXP: Configured channel 12 (TE4/0/1/12) sigtype 128
TE4XXP: Configured channel 13 (TE4/0/1/13) sigtype 128
TE4XXP: Configured channel 14 (TE4/0/1/14) sigtype 128
TE4XXP: Configured channel 15 (TE4/0/1/15) sigtype 128
TE4XXP: Configured channel 16 (TE4/0/1/16) sigtype 896
TE4XXP: Configured channel 17 (TE4/0/1/17) sigtype 128
TE4XXP: Configured channel 18 (TE4/0/1/18) sigtype 128
TE4XXP: Configured channel 19 (TE4/0/1/19) sigtype 128
TE4XXP: Configured channel 20 (TE4/0/1/20) sigtype 128
TE4XXP: Configured channel 21 (TE4/0/1/21) sigtype 128
TE4XXP: Configured channel 22 (TE4/0/1/22) sigtype 128
TE4XXP: Configured channel 23 (TE4/0/1/23) sigtype 128
TE4XXP: Configured channel 24 (TE4/0/1/24) sigtype 128
TE4XXP: Configured channel 25 (TE4/0/1/25) sigtype 128
TE4XXP: Configured channel 26 (TE4/0/1/26) sigtype 128
TE4XXP: Configured channel 27 (TE4/0/1/27) sigtype 128
TE4XXP: Configured channel 28 (TE4/0/1/28) sigtype 128
TE4XXP: Configured channel 29 (TE4/0/1/29) sigtype 128
TE4XXP: Configured channel 30 (TE4/0/1/30) sigtype 128
TE4XXP: Configured channel 31 (TE4/0/1/31) sigtype 128
dahdi: Registered tone zone 0 (United States / North America)
About to enter startup!
TE4XXP: Span 1 configured for CCS/HDB3/CRC4
wct4xxp 0000:05:00.0: timing source auto
wct4xxp 0000:05:00.0: Evaluating spans for timing source
wct4xxp 0000:05:00.0: span 1 is green : syncpos 1
*wct4xxp 0000:05:00.0: RCLK source set to span 1
wct4xxp 0000:05:00.0: Recovered timing mode, RCLK set to span 1
wct4xxp: LOF/LFA detected on span 1 but debouncing for 2500 ms
wct4xxp: LOS detected on span 1 but debouncing for 2500 ms*
SPAN 1: Primary Sync Source
VPM400: Not Present
OCT Result: 0000/000a
VPM450: Not Present
Completed startup!
Detected loss of E1 alignment on span 0!



5) cat /proc/interrupts

cat /proc/interrupts 1
             CPU0       CPU1
    0:     598466     686790   IO-APIC-edge      timer
    1:          4          4   IO-APIC-edge      i8042
    8:          0          0   IO-APIC-edge      rtc0
    9:          0          0   IO-APIC-fasteoi   acpi
   16:          0          0   IO-APIC-fasteoi   pata_jmicron
   19:     488966     400468   IO-APIC-fasteoi   ata_piix, ata_piix
   20:         20          8   IO-APIC-fasteoi   wct4xxp
   28:       3267       3254   PCI-MSI-edge      eth0
  NMI:    1285298    1285102   Non-maskable interrupts
  LOC:     686792     598229   Local timer interrupts
  SPU:          0          0   Spurious interrupts
  PMI:          0          0   Performance monitoring interrupts
  PND:          0          0   Performance pending work
  RES:        535        493   Rescheduling interrupts
  CAL:         25         36   Function call interrupts
  TLB:        136        124   TLB shootdowns
  TRM:          0          0   Thermal event interrupts
  THR:          0          0   Threshold APIC interrupts
  MCE:          0          0   Machine check exceptions
  MCP:          5          5   Machine check polls
  ERR:          1
  MIS:          0


best regards,

Marcio Gomes



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120207/feeb0eea/attachment.htm>

More information about the asterisk-users mailing list