[asterisk-users] Problem provisioning Cisco SPA303

[Support]

Hello.
I've got a Cisco SPA303 that I'm trying to provision via http.  I noticed that 
this device looks very similar to a PAP2T, so I used that as a template for my 
provisioning file.

However, the result is less than stellar.  Line 1 registers and works.  
However, lines 2 and 3 also register as line 1, effectively giving me a 1-line 
phone with 3 buttons.

Also, the line name is the same on all 3 phone lies.

I've looked on Cisco's website and Googled around, but I can not find a true 
example of a provisioning file for this device.  Anything I could find would be 
enough for me to make a template.

Does anyone know of an example provisioning file for this device?

I've included, below, a (sanitized) copy of the file I'm using.  The user_id is 
simply the device's MAC address, followed by a dash, then the line number.

Any help you could give me would be most appreciated.


<flat-profile>  

<HostName>hostnamexxx</HostName>
<User_Password></User_Password>
<Admin_Passwd></Admin_Passwd>

<Auth_Resync-Reboot_1_>No</Auth_Resync-Reboot_1_>
<Auth_Resync-Reboot_2_>No</Auth_Resync-Reboot_2_>

<Display_Name_1_ ua="na">3CCE73D241A9-1</Display_Name_1_>
<User_ID_1_ ua="na">3CCE73D241A9-1</User_ID_1_>
<Auth_ID_1_ ua="na">3CCE73D241A9-1</Auth_ID_1_>
<Password_1_ ua="na">DICLFUXOT1SWNQEW</Password_1_>
<Use_Auth_ID_1_ ua="na">Yes</Use_Auth_ID_1_>
<Use_DNS_SRV_1_>yes</Use_DNS_SRV_1_>
<DNS_SRV_Auto_Prefix_1_ ua="na">Yes</DNS_SRV_Auto_Prefix_1_>

<Display_Name_2_ ua="na">3CCE73D241A9-2</Display_Name_2_>
<User_ID_2_ ua="na">3CCE73D241A9-2</User_ID_2_>
<Auth_ID_2_ ua="na">3CCE73D241A9-2</Auth_ID_2_>
<Password_2_ ua="na">KVJJZPAMSI[WM1ISR</Password_2_>
<Use_Auth_ID_2_ ua="na">Yes</Use_Auth_ID_2_>
<Use_DNS_SRV_2_>yes</Use_DNS_SRV_2_>
<DNS_SRV_Auto_Prefix_2_ ua="na">Yes</DNS_SRV_Auto_Prefix_2_>

<Proxy_1_> example.com </Proxy_1_>
<Proxy_2_>example.com </Proxy_2_>

<Outbound_Proxy_1_> example.com </Outbound_Proxy_1_>
<Outbound_Proxy_2_> example.com </Outbound_Proxy_2_>

<Profile_Rule> http://example.com/index.pl?mac=$MA </Profile_Rule>

<VMWI_Ring_Splash_Len>0</VMWI_Ring_Splash_Len>
<VMWI_Ring_Splash_Len_1_>0</VMWI_Ring_Splash_Len_1_>
<VMWI_Ring_Splash_Len_2_>0</VMWI_Ring_Splash_Len_2_>

</flat-profile>


-- 

Mike Diehl.