[asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)

[Joseph]

I think that part is working correctly I see boths asterisk are connected

on "home_server":
syscon7*CLI> iax2 show registry 
Host                  dnsmgr  Username    Perceived             Refresh  State
192.168.141.1:4569    N       home_serve  192.168.141.8:4569         60  Registered

syscon7*CLI> iax2 show peers
Name/Username    Host                 Mask             Port          Status    
clinic_server    (null)          (D)  255.255.255.255  0             Unmonitored


on "clinic_server":
clinic-amd*CLI> iax2 show peers
Name/Username    Host                 Mask             Port          Status    
home_server      (null)          (D)  255.255.255.255  0             Unmonitored

--
Joseph

On 04/15/12 09:38, Alejandro Imass wrote:
>On Sat, Apr 14, 2012 at 7:55 PM, Joseph <syscon780 at gmail.com> wrote:
>> I forgot to add:
>>
>> clinic-amd*CLI> iax2 show peers
>> Name/Username    Host                 Mask             Port          Status
>>    home_server      (null)          (D)  255.255.255.255  0
>> Unmonitored
>> iaxy-322/iaxy-3  (null)          (D)  255.255.255.255  0
>> Unmonitored
>
>The two Asterisk boxes have to register to each other so home server
>and clinic have to be on the peers list on both sides (or at min on
>one side) and you must see the IP. Make sure you are resolving the
>names correctly and that Asterisk is set-up to resolv DNS names or use
>the IP instead.