[asterisk-users] sip pregi net account registration
gopalakrishnan.an at gmail.com
Wed Apr 11 04:06:17 CDT 2012
After configuring the caller-id to the username the s disappeared and the
username came there. Even then its not getting registered. Trying maximum
On Wed, Apr 11, 2012 at 2:03 PM, Gopalakrishnan N <
gopalakrishnan.an at gmail.com> wrote:
> Hi Warren,
> I was tracking through wireshark and I found the difference between the
> eyebeam registration and Asterisk registration. I found the contact SIP URI
> varies for these two.
> With Eyebeam registration the contact is - "Contact-URI:
> sip:1234 at 192.168.0.57:6506" whereas
> with Asterisk the contact is - "Contact-URI:s at 192.168.0.57" here it is
> routing to "s", thats the reason its not registering, I dont know why its
> contacting "s".
> Any suggestions would be appreciated.
> On Wed, Apr 11, 2012 at 1:24 PM, Gopalakrishnan N <
> gopalakrishnan.an at gmail.com> wrote:
>> My Setup is as follows, I am using Asterisk 1.4.36 with Asterisk GUI
>> installed separately. And the machine is behind pfsense, and the IP of
>> Asterisk machine is allowed in the pfsense. Even I tried to change the
>> registration port number of sip.pregi.net to 6090 because eyebeam uses
>> dynamic port. This is my setup.
>> On Fri, Apr 6, 2012 at 12:33 AM, Warren Selby <wcselby at selbytech.com>wrote:
>>> On Apr 5, 2012, at 3:21 AM, Gopalakrishnan N <
>>> gopalakrishnan.an at gmail.com> wrote:
>>> Hi guys,
>>> I am trying to configure sip.pregi.net account with my Asterisk 1.4.X,
>>> since its a free account, its not getting registered, even my machine IP is
>>> allowed in firewall. In the same machine if i register openser account
>>> which is in public i am able to register. while checking the sip debug the
>>> register request is keep on sending but there is no response.
>>> what i did is i registered the same account in my softphone installed in
>>> my laptop, there it got registered. only with Asterisk its not registering,
>>> I tried allowing externip as my routers IP, even then its not getting
>>> What settings are you currently using, and what does your infrastructure
>>> look like?
>>> Warren Selby, dCAP
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users