[asterisk-users] Question about voip.ms service.

Tue Sep 13 14:59:27 CDT 2011

I see the section you are talking about. It is on the home page if I am not
logged in. I see the Authentication section and the text "IAX/SIP
registration", but it doesn't seem to be a link. I am not sure how I can
find the page that has the details about the IAX/SIP registration. I see in
the wiki there is a page that has the configuration info for iax.conf and
extensions.conf.

Thanks for your help.
naren

On Tue, Sep 13, 2011 at 2:25 PM, Danny Nicholas <danny at debsinc.com> wrote:

> Did you read the “IAX/SIP registration” section (under Authentication) on
> voip.ms? ****
>
> ** **
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *naren
> *Sent:* Tuesday, September 13, 2011 2:22 PM
> *To:* John Novack
> *Cc:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Question about voip.ms service.****
>
> ** **
>
> Ok... this is probably a dumb question but I can't figure out how to set
> voip.ms to use IAX for my DID... with SIP I was able to specify the URI so
> I pointed it to my asterisk installation, but with IAX I don't have that
> option. Is that supposed to work some other way?****
>
> ** **
>
> Thanks a bunch!****
>
> On Mon, Sep 12, 2011 at 11:18 PM, naren <naren.salem at gmail.com> wrote:****
>
> I am novice with Asterisk, I had to piece together a lot of bits of info
> from lots of internet searches to get my very basic setup working. I
> probably shouldn't say that because it seems like Nat is not a very basic
> setup with Asterisk.****
>
> ** **
>
> The reason for wanting to stay with SIP is because I have my setup working
> with that protocol with an incoming and an outgoing line. I just wanted to
> add a second outgoing with voip.ms. ****
>
> ** **
>
> But, I have come so far, so well why not... I will give IAX a shot, and see
> what traps I need to wade through :)****
>
> ** **
>
> Thanks****
>
> ** **
>
> On Mon, Sep 12, 2011 at 11:09 AM, John Novack <
> jnovack at stromberg-carlson.org> wrote:****
>
> Never have had a problem with their IAX service.
>
> And ( for now ) a little hedge against the hackers.
>
> Since Asterisk is involved, why not use IAX anyway?
>
>
> John Novack****
>
>
>
>
> naren wrote: ****
>
> ** **
>
> I also found this... seems like voip.ms outbound is broken for now!****
>
> ** **
>
> http://pbxinaflash.com/forum/showthread.php?t=10735****
>
> ** **
>
> ** **
>
> On Sun, Sep 11, 2011 at 10:34 PM, naren <naren.salem at gmail.com> wrote:****
>
> Hi, ****
>
> ** **
>
> I am trying to set up my asterisk 1.8.5 with voip.ms. I had no problem
> with the incoming, but my outgoing is not working. If at all possible, I
> would like to stick with SIP. Since the original poster (Glen) had mentioned
> that he had gotten outgoing working, I was wondering if you would be kind
> enough to post some thoughts on that. Were you able to get it working with
> just the default example sip.conf / extensions.conf settings that they have
> on their website?****
>
> ** **
>
> I have pretty much the same settings. When I dial out, the destination
> rings, but I can't hear a ringback tone from on the source side ( I am using
> a PAP2T router with a phone). I have set up outgoing with actionvoip before
> and that is working fine, so I am thinking my router settings for my ports
> are correct - but I am no expert.****
>
> ** **
>
> I would really appreciate it if you could post the relevant section of your
> sip.conf for me.****
>
> ** **
>
> Thanks!****
>
> Naren****
>
> ** **
>
> On Thu, Jun 9, 2011 at 3:22 PM, Steve Edwards <asterisk.org at sedwards.com>
> wrote:****
>
> On Thu, 9 Jun 2011, John Novack wrote:****
>
> I use voip.ms and have no issues using IAX and Asterisk 1.4.xx****
>
> ** **
>
> 'slam-dunk.' ****
>
> ** **
>
> Though they suggest SIP, I chose IAX and have 4569 UDP open in my firewall
> ****
>
>
> a****
>
> Their on line config samples just work!****
>
> ** **
>
> is ****
>
> ** **
>
> Suggest you check your firewall and your configs, and above all post some
> more information****
>
> ** **
>
> IAX ****
>
> ** **
>
> If you really want to upset some, top post as I have just done!****
>
> ** **
>
> Agreed. ****
>
> ** **
>
> The real issue is communication, top bottom or in the middle****
>
> ** **
>
> Sometimes, it's just about being considerate to 'the next guy.'
>
> --
> Thanks in advance,
> -------------------------------------------------------------------------
> Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
> Newline                                              Fax: +1-760-731-3000
> ****
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users****
>
> ** **
>
>
>
> ****
>
> --****
>
> _____________________________________________________________________****
>
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --****
>
> New to Asterisk? Join us for a live introductory webinar every Thurs:****
>
>                http://www.asterisk.org/hello****
>
> ** **
>
> asterisk-users mailing list****
>
> To UNSUBSCRIBE or update options visit:****
>
>    http://lists.digium.com/mailman/listinfo/asterisk-users****
>
> ** **
>
> -- ****
>
> ** **
>
> Dog is my Co-pilot****
>
> ** **
>
> ** **
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110913/baac4b76/attachment.htm>