[asterisk-users] RTP ports used by Asterisk in dialplan

[Danny Nicholas]

You could temporarily change rtp.conf to use just 4 ports (say 10001-10004)
and monitor 10001 and 10002.  On a production system you would have to do
something with a tool like netstat to try and predict which ports in the
range would be used.

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of ISABEL ORDAS
ARNAL
Sent: Thursday, October 20, 2011 8:28 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] RTP ports used by Asterisk in dialplan

 

Dear all,  

 

Do you know if there is a way to know the 2 RTP ports that Asterisk is using
for audio flow in a call in the dialplan?

I would like to launch a Linux shell command “tcpdump” to capture audio flow
in those 2 RTP ports before call starts and stop capturing at the end of the
call. 

 

Regards,

Isabel

 

  _____  

Este mensaje se dirige exclusivamente a su destinatario. Puede consultar
nuestra política de envío y recepción de correo electrónico en el enlace
situado más abajo.
This message is intended exclusively for its addressee. We only send and
receive email on the basis of the terms set out at.
http://www.tid.es/ES/PAGINAS/disclaimer.aspx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111020/7ff96764/attachment.htm>