[asterisk-users] When dialing the number, I need to see it in the Cisco LCD Phone

Tue Nov 29 08:48:15 CST 2011

I have found that this is a feature on most phones. It is usually called 
something like display in call dialed digits.

This is an option on all three of the phone manufactures products we use. 
If enabled digits dialed during an active call to be shown on the screen.  
This is not a function of asterisk but the device. 

Thanks

Bryant Zimmerman (ZK Tech Inc.)

616-855-1030 Ext. 2003

----------------------------------------

From: "Danny Nicholas" <danny at debsinc.com>

Sent: Tuesday, November 29, 2011 9:37 AM

To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>

Subject: Re: [asterisk-users] When dialing the number, I need to see it in 
the Cisco LCD Phone

If you are using a 1.X (1.4, 1.6 or 1.8) version you probably need to 
either

use saynumber() to playback the number before dialing or use message() to

send an IM to the phone since that architecture "only knows" 9 as the 
number

you dialed. I think 10.0 will "refresh" the number when Dial is executed. 

Or this might work for you, but if it does your callee will probably 
wonder

what is up.

exten =>

_ZXXXXXXXX,1,MixMonitor(${CHANNEL}${EXTEN}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)

}.wav)

exten => _ZXXXXXXXX,n,Set(CALLERID(num)=${EXTEN})

exten => _ZXXXXXXXX,n,Dial(${PSTNTRUNK}/${EXTEN})

exten => _ZXXXXXXXX,n,Playback(vm-nobodyavail)

exten => _ZXXXXXXXX,n,Hangup()

exten => _ZXXXXXXXX,104,Congestion()

exten => _ZXXXXXXXX,105,Hangup()

-----Original Message-----

From: asterisk-users-bounces at lists.digium.com

[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of bilal 
ghayyad

Sent: Tuesday, November 29, 2011 5:04 AM

To: asterisk-users at lists.digium.com

Subject: [asterisk-users] When dialing the number, I need to see it in the

Cisco LCD Phone

Dear List;

I have internal Menu that I use it when doing outside call (it ask some

questions, and then it ask to dial the number that need to call it), I can

access this menu by dialing 9, but after the Background stay play the wave

file, then whatever I dial (to select) and whatever the number that I dial

it, I do not see it in the LCD of the IP Phone, it stays display on the IP

Phone the 9 number (which is the first dialed number to access the Menu),

how can I display the dialed numbers that I am dialing on the LCD, because 
I

need to see what I dialed (at least to know I am dialing the right digits

and to know what the number I am calling him now)!!

I am adding below the extensions.conf part that is related to this 
scenario:

exten => 9,1,Set(AgentCount=1)

exten => 9,2,Background(WhichCustomer)

exten => 1,1,Set(EnteredOption=1)

exten => 1,2,Goto(ExternalOnly,s,1)

exten => 2,1,Set(EnteredOption=2)

exten => 2,2,Set(CALLERID(pres)=allowed) exten =>

2,3,Set(CALLERID(num)=65631040) exten => 2,4,Goto(ExternalOnly,s,1)

exten => i,1,Playback(pbx-invalid)

exten => i,2,Set(AgentCount=$[${AgentCount}+1])

exten => i,3,GotoIf($[${AgentCount} < 3]?ExternalAgent,9,2:4) exten =>

i,4,Playback(vm-goodbye) exten => i,5,Hangup()

exten => t,1,Set(AgentCount=$[${AgentCount}+1])

exten => t,2,GotoIf($[${AgentCount} < 3]?ExternalAgent,9,2:3) exten =>

t,3,Playback(vm-goodbye) exten => t,4,Hangup() ;

[ExternalOnly]

exten => s,1,Set(OutCount=1)

exten => s,2,Background(EnterTheNumber)

exten => i,1,Playback(pbx-invalid)

exten => i,2,Set(OutCount=$[${OutCount}+1])

exten => i,3,GotoIf($[${OutCount} < 3]?ExternalOnly,s,2:4) exten =>

i,4,Playback(vm-goodbye) exten => i,5,Hangup()

exten => t,1,Set(OutCount=$[${OutCount}+1])

exten => t,2,GotoIf($[${OutCount} < 3]?ExternalOnly,s,2:3) exten =>

t,3,Playback(vm-goodbye) exten => t,4,Hangup()

exten =>

_ZXXXXXXXX,1,MixMonitor(${CHANNEL}${EXTEN}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)

}.wav)

exten => _ZXXXXXXXX,2,Dial(${PSTNTRUNK}/${EXTEN})

exten => _ZXXXXXXXX,3,Playback(vm-nobodyavail)

exten => _ZXXXXXXXX,4,Hangup()

exten => _ZXXXXXXXX,103,Congestion()

exten => _ZXXXXXXXX,104,Hangup()

Any help on how to be able to display at the Cisco IP Phone LCD what I am

dialing during this scenario?

Regards

Bilal

--

_____________________________________________________________________

-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New 
to

Asterisk? Join us for a live introductory webinar every Thurs:

http://www.asterisk.org/hello

asterisk-users mailing list

To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-users

--

_____________________________________________________________________

-- Bandwidth and Colocation Provided by http://www.api-digital.com --

New to Asterisk? Join us for a live introductory webinar every Thurs:

http://www.asterisk.org/hello

asterisk-users mailing list

To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111129/56a280ae/attachment.htm>