[asterisk-users] TE122

[Tony Mountifield]

In article <4EC120C1.8080905 at pagestation.com>,
Jerry Geis <geisj at pagestation.com> wrote:
>   I have had a couple thunderstorms take out a card, again last night.
> The card with "dahdi show status" still report OK both times.
> 
> When calling into the card I get all circuits are busy.
> 
> However, simply replacing the card did the trick. Before that
> I stopped asterisk, restarted DAHDI, rebooted all those... The card
> always reported OK with show status. Only after replacing the card
> did it start to work again.

Did you actually power off and on again with the original card in place?
I have found in the past that a card can get in a state that just a reset
is insufficient to clear, but that a power cycle does make it work again.

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org