[asterisk-users] 10.0.0-rc1: dahdi doesn't see card

sean darcy seandarcy2 at gmail.com
Fri Nov 11 16:50:52 CST 2011


 From asterisk -cvvvvv

   == Parsing '/etc/asterisk/chan_dahdi.conf':   == Found
   == Parsing '/etc/asterisk/users.conf':   == Found
     -- Automatically generated pseudo channel
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: 
Ignoring any changes to 'userbase' (on reload) at line 23.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: 
Ignoring any changes to 'vmsecret' (on reload) at line 31.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: 
Ignoring any changes to 'hassip' (on reload) at line 35.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: 
Ignoring any changes to 'hasiax' (on reload) at line 39.
[Nov 11 17:43:28] WARNING[5756]: chan_dahdi.c:18155 process_dahdi: 
Ignoring any changes to 'hasmanager' (on reload) at line 47.
   == Registered channel type 'DAHDI' (DAHDI Telephony Driver)
   == Manager registered action DAHDITransfer
   == Manager registered action DAHDIHangup
   == Manager registered action DAHDIDialOffhook
   == Manager registered action DAHDIDNDon
   == Manager registered action DAHDIDNDoff
   == Manager registered action DAHDIShowChannels
   == Manager registered action DAHDIRestart
  chan_dahdi.so => (DAHDI Telephony Driver)
......

But, no dahdi.

dahdi show channels shows nothing:

    Chan Extension  Context         Language   MOH Interpret 
Blocked    State      Description
  pseudo            default                    default 
        In Service


dahdi_cfg -vvv
DAHDI Tools Version - 2.4.1

DAHDI Version: 2.5.0.1
Echo Canceller(s): HWEC, OSLEC
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 04)

3 channels to configure.

Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 4 to oslec

 From dmesg:
dahdi: Telephony Interface Registered on major 196
[    9.849036] dahdi: Version: 2.5.0.1
[    9.899531] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[    9.899919] wctdm 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 
(level, low) -> IRQ 19
[    9.901845] Freshmaker version: 73
[    9.902565] Freshmaker passed register test
[   11.287170] Module 0: Installed -- AUTO FXS/DPO
[   12.172362] Module 1: Installed -- AUTO FXS/DPO
[   12.172795] Module 2: Not installed
[   12.373273] Module 3: Installed -- AUTO FXO (FCC mode)
[   12.374071] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules)

Any help appreciated.

sean





More information about the asterisk-users mailing list