[asterisk-users] Asterisk 1.6: Custom Name for Recordings file

[RSCL Mumbai]

On Fri, May 13, 2011 at 11:07 PM, Eric Wieling <EWieling at nyigc.com> wrote:

>
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> > RSCL Mumbai
> > Sent: Friday, May 13, 2011 1:32 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: [asterisk-users] Asterisk 1.6: Custom Name for
> > Recordings file
> >
> > Hi,
> >
> > I have latest Elastix 64 bit setup and running fine (Asterisk
> > 1.6.2.13)
> >
> > I would like to customize the file name of call recordings:
> > /var/spool/asterisk/monitor/20110511-110858-1305126538.912.wav
> >
> > I would like to include the extension number in the file name.
> >
> > Did a lot of googling but not much help.
> >
> > Pls advice.
>
> See the "fname_base" information below.
>
> ================================
>
> pbx*CLI> core show application monitor
>
>  -= Info about application 'Monitor' =-
>
> [Synopsis]
> Monitor a channel.
>
> [Description]
> Used to start monitoring a channel. The channel's input and output voice
> packets are logged to files until the channel hangs up or monitoring is
> stopped
> by the StopMonitor application.
> By default, files are stored to "/var/spool/asterisk/monitor/". Returns
> '-1' if monitor files can't be opened or if the channel is already
> monitored,
> otherwise '0'.
>
> [Syntax]
> Monitor([file_format[:urlbase]][,fname_base[,options]])
>
> [Arguments]
> file_format
>    optional, if not set, defaults to 'wav'
> fname_base
>    if set, changes the filename used to the one specified.
> options
>    m: when the recording ends mix the two leg files into one and delete
>    the two leg files. If the variable ${MONITOR_EXEC} is set, the
> application
>    referenced in it will be executed instead of soxmix/sox and the raw leg
>    files will NOT be deleted automatically. soxmix/sox or ${MONITOR_EXEC}
>    is handed 3 arguments, the two leg files and a target mixed file name
>    which is the same as the leg file names only without the in/out
> designator.
>    If ${MONITOR_EXEC_ARGS} is set, the contents will be passed on as
>    additional arguments to ${MONITOR_EXEC}. Both ${MONITOR_EXEC} and the
>    Mix flag can be set from the administrator interface.
>
>    b: Don't begin recording unless a call is bridged to another channel.
>
>    i: Skip recording of input stream (disables 'm' option).
>
>    o: Skip recording of output stream (disables 'm' option).
>
>
> [See Also]
> StopMonitor()
>
>
>
Thx Eric.
I read the link "e1*CLI> core show application monitor" but I could not
follow what I should do to customize the file name of the recording.
I guess some changes to the dialplan is required ?

Thx
S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110513/ae69e657/attachment.htm>