[asterisk-users] Sangoma wapipe installation error

[satish patel]

Hey, I did  ./Setup dahdi and everything went well but i didn't find any command wancfg_dahdi 


        ----------------------------------------------------------
                  WANPIPE v3.5.19 Installation Script
            Copyright (c) 1995-2010, Sangoma Technologies Inc.
        ----------------------------------------------------------

WANPIPE META CONFIGURATION

There are two configuration files associated with WANPIPE.

1) /usr/local/src/asterisk/wanpipe-3.5.19/wanrouter.rc:
        - defines locations of important files such as lock
          and configuration files as well as start/stop
          order of multiple WANPIPE devices.
2) /usr/local/src/asterisk/wanpipe-3.5.19/wanpipe1.conf:
        - main configuration file for each WANPIPE device.
        - defines interfaces, hardware and protocol information.
        - this file can be created using the 'wancfg' GUI
          utility or manually based on sample files located
          in /etc/wanpipe/samples.

Please read the WanpipeInstallation.(pdf/txt) manual for further
information.


Wanpipe META config file found in /etc/wanpipe directory

Wanpipe startup sequence: wanpipe1


        ----------------------------------------------------------
                  WANPIPE v3.5.19 Installation Script
            Copyright (c) 1995-2010, Sangoma Technologies Inc.
        ----------------------------------------------------------

WANPIPE UTILITIES SETUP

WANPIPE utilities are used to:
        1) create configuration files: for Zaptel and Asterisk
                /usr/sbin/wancfg_zaptel #Zaptel and Asterisk
                /usr/sbin/wancfg_dahdi  #Dahdi and Asterisk
                /usr/sbin/wancfg_smg    #BRI/SS7, Zaptel and Asterisk
                /usr/sbin/wancfg_tdmapi #TDM API
        2) create WANPIPE WAN/IP configuration files.
                (/usr/sbin/wancfg)
        3) start,stop,restart individual/all devices and interfaces.
                (/usr/sbin/wanrouter)
        4) debug line, protocol and driver problems.
                (/usr/sbin/wanpipemon)
        5) aid in WANPIPE API development
                (/etc/wanpipe/api)

Refer to the WanpipeInstallation.(pdf/txt) for more information.


Compiling WANPIPE Utilities ... Done.


Compiling WANPIPE WanCfg Utility ...Done.


Compiling WANPIPE LibSangoma API library ...Done.


Compiling WANPIPE LibStelephony API library ...Done.


Compiling WANPIPE API Development Utilities ...Done.

Compiling WANPIPE HWEC Utilities ...Done.


        WANPIPE Environment Setup Complete !!!

Installing WANPIPE Files ... !
Installing  WANPIPE Utilities in /usr/sbin
Installing wanrouter.rc in /etc/wanpipe
Installing wanpipe libraries in /etc/wanpipe
Installing firmware in /etc/wanpipe/firmware
Installing documentation in /usr/share/doc/wanpipe
Installing sample api code in /etc/wanpipe/api
Installing AFT Firmware update utility in /etc/wanpipe/util
cp: cannot overwrite non-directory `/etc/wanpipe/util/wan_aftup' with directory `util/wan_aftup/'
Installing driver headers in /etc/wanpipe/api/include/linux
Installing Hardware Echo Cancel Utilites

        ----------------------------------------------------------
                  WANPIPE v3.5.19 Installation Script
            Copyright (c) 1995-2010, Sangoma Technologies Inc.
        ----------------------------------------------------------

WANPIPE INSTALLATON: COMPLETE

WANPIPE installation is now complete. WANPIPE kernel drivers
and configuration/debug utilities have been compiled and installed.

        1) Proceed to configure the WANPIPE drivers:
                Asterisk/Zaptel  : /usr/sbin/wancfg_zaptel
                Asterisk/Dahdi   : /usr/sbin/wancfg_dahdi
                TDM API          : /usr/sbin/wancfg_tdmapi
                SMG SS7/BRI/PRI  : /usr/sbin/wancfg_smg
                WAN Routing/API  : /usr/sbin/wancfg
        2) Use the /usr/sbin/wanrouter startup script to start and stop
           the router. (eg: wanrouter start)
        3) To uninstall WANPIPE package run ./Setup remove

Please read http://wiki.sangoma.com for further instructions.

root at example:/usr/local/src/asterisk/wanpipe-3.5.19# wancfg_dahdi

wancfg_dahdi: command not found
root at example:/usr/local/src/asterisk/wanpipe-3.5.19#


Date: Wed, 23 Mar 2011 09:28:25 +0100
From: tg at ovm-group.com
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Sangoma wapipe installation error



  


    
  
  
    Try:

    

    cd /usr/src/dahdi

    ./Setup dahdi

    

    That's it.

    

    Am 22.03.2011 21:06, schrieb satish patel:
    
      
      Hey!

      

      I am installing Sangoma A102D wanpipe driver and i got following
      error. what is this ? why dir isn't there ?

      

      wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi

      wanpipe-3.5.16 # make install

      ....Send

      ....

      ....

      Installing Wanpipe Firmware  update utility in
      /etc/wanpipe/util/wan_aftup

      install -D wan_aftup      /usr/sbin/wan_aftup

      install -d /etc/wanpipe/util/wan_aftup/scripts

      install: cannot create directory `/etc/wanpipe/util/wan_aftup':
      Not a directory

      make[2]: *** [install] Error 1

      make[2]: Leaving directory
      `/usr/local/src/asterisk/wanpipe-3.5.16/util/wan_aftup'

      make[1]: *** [install] Error 2

      make[1]: Leaving directory
      `/usr/local/src/asterisk/wanpipe-3.5.16/util'

      make: *** [install_util] Error 2
    

  



--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110323/56c63f7e/attachment.htm>