[asterisk-users] Weird PRI error on an QUAD E1 span: Ring requested on unconfigured channel 255/255

[Tim Panton]

On 8 Mar 2011, at 15:48, Thorsten Göllner wrote:

> 
>> After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel
>> BMC 450 it is connected to.
>> The cli fills up with these:
>> 
>> sig_pri.c: Ring requested on unconfigured channel 255/255 span 3
>> 
>> 
>> Is this likely to be a
>> 	1) config error
>> 	2) cable issue (I made them)
>> 	3) hardware problem with the Digium card
>> 	4) software (lib pri)
>> 
>> Any clues? Anyone seen this recently (google shows it in 2005 but not since as far as I can see)
>> 
> 
> Which version of libpri?


libpri version: 1.4.11.5                                                        
Asterisk01*CLI> dahdi show version                                              
DAHDI Version: 2.4.0 Echo Canceller:                                            
Asterisk01*CLI> core show version                                               
Asterisk 1.8.2.3 built by thp @ Asterisk01 on a x86_64 running Linux on 2011-02-07 14:32:26 UTC


Tim.

Tim Panton - Web/VoIP consultant and implementor
www.westhawk.co.uk