[asterisk-users] Loudness of recorded wav-audio

[Felix Dong]

I tried to ajust the tx- and rxgain for the sip peer in sip.conf. And
restarted the asterisk. But it takes no effect. Any suggestion?


2011/3/4 Danny Nicholas <danny at debsinc.com>

>  Defaults are 0.0 (leave volume unchanged)  +values make volume louder, -
> softer.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Friday, March 04, 2011 8:55 AM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Loudness of recorded wav-audio
>
>
>
> Could yoz tell me the default value of rxgain or txgain, if there is no
> rxgain or txgain in conf-data defined?
>
> Von meinem iPad gesendet
>
>
> Am 04.03.2011 um 15:34 schrieb "Danny Nicholas" <danny at debsinc.com>:
>
>  In sip.conf, add rxgain=-4.0 to the peer.  This (feel free to correct)
> should reduce the incoming volume by 4 decibels. You’ll have to do a “sip
> reload” for this to take effect.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Friday, March 04, 2011 8:33 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Loudness of recorded wav-audio
>
>
>
> Thank you! How can I reduce the RXgain?
>
>
> Am 04.03.2011 um 15:21 schrieb "Danny Nicholas" < <danny at debsinc.com>
> danny at debsinc.com>:
>
>   ------------------------------
>
> *From:* <asterisk-users-bounces at lists.digium.com>
> asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Friday, March 04, 2011 2:31 AM
> *To:* <asterisk-users at lists.digium.com> <asterisk-users at lists.digium.com>
> asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] Loudness of recorded wav-audio
>
>
>
> Hello,
>
>
>
> I sent a wav-audio to Asterisk though SIP and ISDN channels and recorded it
> in wav-audio at the Asterisk server. I found the loudness level of the
> recorded audio was too high comparing with the orginal audio. How can I
> ajust it, so that there will be no amplifier used for recording.
>
> Thanks a lot.
>
>
> best regards
>
> Felix
>
>
>
> two options are:
>
>    1. reduce RXgain – assuming your are using Record() command
>    2. use sox to reduce the volume;  something like sox –v .8 file1.wav
>    file2.wav
>
>
>
>  --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by <http://www.api-digital.com>
> http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                <http://www.asterisk.org/hello><http://www.asterisk.org/hello>
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    <http://lists.digium.com/mailman/listinfo/asterisk-users><http://lists.digium.com/mailman/listinfo/asterisk-users>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                <http://www.asterisk.org/hello>
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    <http://lists.digium.com/mailman/listinfo/asterisk-users>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110307/226fb124/attachment-0001.htm>