[asterisk-users] Digium HA8. Does settings order matters (in system.conf) ?

[Olivier]

2011/6/22 Shaun Ruffell <sruffell at digium.com>

> On Wed, Jun 22, 2011 at 01:32:00PM +0200, Olivier wrote:
> > Hi,
> >
> > I'm reading Digium HA8 manual (page 55).
> > It lists several parameters that can be used to configure a BRI port.
> >
> > More precisely, it suggests that :
> > Term, is the last parameter
> > NT/TE is the one just before (starting from the end).
> >
> > If I'm not mistaken, it seems dahdi_genconf generates
> /etc/dahdi/system.conf
> > files in which both parameters order is reversed :
> > # Span 1: WCBRI/0/0 "HA8-0000 Board 1" (MASTER) AMI/CCS RED
> > span=1,1,0,ccs,ami,term,te
> >
> > Should I care ?
>
> No. The order of the arguments after the fifth is not significant but I
> agree that it is confusing since the position of the other arguments are
> signficant.
>
> Cheers,
> Shaun
>


Maybe a line in the manual should help.

Thanks.

>
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110622/241bc515/attachment.htm>