[asterisk-users] How to configure unused BRI ports from a HA8 board ?

[A J Stiles]

On Wednesday 15 Jun 2011, Olivier wrote:
> At the moment, my console is full with messages such as :
> [Jun 15 09:06:25] WARNING[2140]: chan_dahdi.c:3369 pri_find_dchan: No
> D-channels available!  Using Primary channel 9 as D-channel anyway!
> [Jun 15 09:06:25] WARNING[2141]: chan_dahdi.c:3369 pri_find_dchan: No
> D-channels available!  Using Primary channel 12 as D-channel anyway!
>
> These messages relate to ports 3 and 4 which are unused and unplugged.
> I can connect those 2 ports to each other (using a straight RJ11-RJ11 cable
> ?) and tie them to an used DAHDI group but this wouldn't work for a single
> port and I'm wondering if a smarter solution exists.
>
> Suggestions ?

Make sure the entries for these ports are commented out 
in /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf .  

-- 
AJS

Answers come *after* questions.