[asterisk-users] Ground Start ATA / VOIP Gateway

[John Novack]

The SV8100 can do either ground or loop
Assuming you can access the system it can easily be changed.

Programming manual here:

http://www.telecomcepts.com/downloads/SV8100/SV8100 Programming Manual_1.pdf

the original installer may have locked it down, but it CAN be changed.

John Novack


Robert Huddleston wrote:
>
> Ya -- customer is on a nice NEC SV8100.. The card is a ground start 
> card.. they are currently being fed by a Cisco IAD2431 w/ RJ-21 
> punchdown cross-connect.
>
> But that IAD2431 uses T1/E1 as WAN.. They are doing away with the T1 
> and want to use Ethernet for wan...
>
> So IAD2431 would be great -- but if it only allows T1/E1 for WAN -- 
> I'm shot.
>
> *From:* John Novack [mailto:jnovack at stromberg-carlson.org]
> *Sent:* Tuesday, June 14, 2011 3:47 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Cc:* Robert Huddleston
> *Subject:* Re: [asterisk-users] Ground Start ATA / VOIP Gateway
>
>
> Robert Huddleston wrote:
>
> Anyone have recommendations for a gateway / ATA for business that can 
> do GroundStart? Preferably with an rj-21 -- but okay if not..
>
>
> I don't know of any ATA that will do GS
> An RJ-21 is the designation for a 66 block with 25 pair connector on 
> the side
> GS is available with many channel banks though a T1 card and channel 
> bank might be overkill for your application.
> Is this to go into a "legacy" switch?
> Most have line cards that can be easily switched to Loop
>
> Is this in the US, or ???
> John Novack
>
>
>
> -- 
>   
> Dog is my Co-pilot

-- 

Dog is my Co-pilot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110614/1918406e/attachment.htm>