[asterisk-users] Spectralink 8002

MrHanMan mrhanman at gmail.com
Fri Jan 14 16:29:17 CST 2011


Do you see any attempt on the wireless controller from the phone to
connect to anything on the network after the TFTP exchange?  Any
traffic at all on the network from the phone?  Have you tried to
capture packets with Wireshark or something similar?

On Fri, Jan 14, 2011 at 4:15 PM, Jonathan C. Bailey
<jbailey at co.marshall.ia.us> wrote:
> It's a Netgear WG102 AP with a WFS709TP wireless controller. The controller is basically a rebranded Aruba MC-800 (don't know about the APs).
>
> I've also tried on my WRT-54G at home, and it does the same thing.
>
>
> -Jon
>
> ----- Original Message -----
> From: "MrHanMan" <mrhanman at gmail.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> Sent: Friday, January 14, 2011 3:45:55 PM
> Subject: Re: [asterisk-users] Spectralink 8002
>
> The only time I've seen "no net found" on a spectralink phone is when
> it's out of range of the AP.  That doesn't make sense if it just
> successfully connected to the TFTP server.  What sort of AP are you
> connecting to?  Could it have a security feature that disallows
> reconnects within a certain time frame?
>
> On Fri, Jan 14, 2011 at 3:39 PM, Jonathan C. Bailey
> <jbailey at co.marshall.ia.us> wrote:
>> I figured that (since the firmware is "current" on the phone). I just can't figure why it won't connect.
>>
>> I did notice the phone was showing "no net found" and the AP MAC (or similar) right after that traffic.
>>
>>
>> -Jon
>>
>> ----- Original Message -----
>> From: "MrHanMan" <mrhanman at gmail.com>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
>> Sent: Friday, January 14, 2011 3:32:19 PM
>> Subject: Re: [asterisk-users] Spectralink 8002
>>
>> If memory serves, those errors you see are normal.  The phone
>> downloads the slnk_cfg.cfg to see what other files it should get.  It
>> then just downloads the first block of each file to compare with what
>> it already has.  If it is the same, it breaks the connection, which
>> the TFTP server sees as an error.  Beyond that, I'm afraid I can't be
>> much help.
>>
>> On Fri, Jan 14, 2011 at 2:46 PM, Jonathan C. Bailey
>> <jbailey at co.marshall.ia.us> wrote:
>>> Hello,
>>>
>>> I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then says "No net found" and starts all over again. The phone has already sucessfully connected and downloaded firmware (the latest - 130.009) without issue.
>>>
>>> Also, each time it boots, we see the following traffic from the phone (seems to only be looking at firmware and refusing to do anything else). I've checked the admin guide, and everything seems to be set up properly. Has anyone else used these phones and had similar issues? Thanks!
>>>
>>>  0.036561  PHONE_IP -> SERVER_IP  TFTP Read Request, File: slnk_cfg.cfg\000, Transfer type: octet\000
>>>  0.036891  SERVER_IP -> PHONE_IP  TFTP Data Packet, Block: 1 (last)
>>>  0.045617  PHONE_IP -> SERVER_IP  TFTP Acknowledgement, Block: 1
>>>  0.049106  PHONE_IP -> SERVER_IP  TFTP Read Request, File: pd11wsd.bin\000, Transfer type: octet\000
>>>  0.049416  SERVER_IP -> PHONE_IP  TFTP Data Packet, Block: 1
>>>  0.068726  PHONE_IP -> SERVER_IP  TFTP Error Code, Code: File already exists, Message: No download needed\000
>>>  0.072439  PHONE_IP -> SERVER_IP  TFTP Read Request, File: pd11gl3.bin\000, Transfer type: octet\000
>>>  0.072729  SERVER_IP -> PHONE_IP  TFTP Data Packet, Block: 1
>>>  0.095686  PHONE_IP -> SERVER_IP  TFTP Error Code, Code: File already exists, Message: No download needed\000
>>>  0.098958  PHONE_IP -> SERVER_IP  TFTP Read Request, File: pd11wsd3.bin\000, Transfer type: octet\000
>>>  0.099228  SERVER_IP -> PHONE_IP  TFTP Data Packet, Block: 1
>>>  0.120597  PHONE_IP -> SERVER_IP  TFTP Error Code, Code: File already exists, Message: No download needed\000
>>>  0.123618  PHONE_IP -> SERVER_IP  TFTP Read Request, File: pi110001.bin\000, Transfer type: octet\000
>>>  0.123892  SERVER_IP -> PHONE_IP  TFTP Data Packet, Block: 1
>>>  0.145259  PHONE_IP -> SERVER_IP  TFTP Error Code, Code: File already exists, Message: No download needed\000
>>>
>>>
>>>
>>>
>>> -Jon
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>               http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list