[asterisk-users] Too Few Fax Detections

[Kevin P. Fleming]

On 01/05/2011 08:12 PM, Thomas Rymes wrote:
> OK, after my last message about fax detection, I feel a bit better informed and able to press forward. I started looking into this because I was getting lots of false positive fax detection errors in the logs with faxdetect=both set in chan_dahdi.conf.
>
> Anyhow, I do not currently use fax detection, and we have a dedicated Fax DID on our PRI, so setting faxdetect=no works fine. Having said that, I would like to sort it out as I may want to use fax detection in the future. Unfortunately, I seem to be having odd results. I set faxdetect=incoming last night and restarted dahdi and asterisk. Since that time, we have received 17 faxes, but I only have three fax detections in my asterisk log, so far as I can tell:
>
> # grep -i fax /var/log/asterisk/full
> [Jan  5 05:53:39] NOTICE[6686] chan_dahdi.c: Fax detected, but no fax extension
> [Jan  5 10:24:27] NOTICE[11834] chan_dahdi.c: Fax detected, but no fax extension
> [Jan  5 11:48:52] NOTICE[13804] chan_dahdi.c: Fax detected, but no fax extension
>
> All three calls listed are indeed fax calls, and since there is no fax extension in that context, the call just proceeds along as if nothing happened (which is appropriate).
>
> My question is this: If I have received 17 faxes since enabling fax detection, shouldn't I see ~17 entries in the log?

How are you delivering the inbound FAX calls to your FAX machine? If you 
are sending them back out a DAHDI channel (to an FXS port on an analog 
card, for example), then as soon as the two channels are bridged the 
audio never comes up to Asterisk (under normal circumstances), it stays 
in DAHDI, so the Asterisk DSP can't detect the CNG tone. If the FAX 
machine answers the incoming call fairly quickly, there may not be any 
opportunity for the CNG to be detected. In addition, you may not be even 
receiving any audio from the calling FAX machine until you answer the 
incoming channel (depending on your PRI provider).

If you want to have the best chance to detect each incoming FAX using 
the Asterisk DSP, you'll have to answer the incoming channel as soon as 
it hits the dialplan, then wait 3 or 4 seconds, then send the call 
onwards to your actual FAX machine. FAX detection is really expected to 
be used on calls that would otherwise be answered by a non-FAX endpoint 
(IVR, voicemail, user with a phone, etc.)

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
skype: kpfleming | jabber: kfleming at digium.com
Check us out at www.digium.com & www.asterisk.org