[asterisk-users] Paging with Polycom 3.3.x

[Mike]

Hi Terry,

 

I did that, and did find a autoRingAnswer and Ringanswer modes that I tried
to use, but somewhere I am missing something that breaks it. If ever you
find what you did, I`d appreciate if you'd share with me.

 

Mike

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Terry Brummell
Sent: Thursday, February 24, 2011 2:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk Users
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Paging with Polycom 3.3.x

 

If you compare a working config with a non-working you will see something
with the answer type.  I had that issue until I down rev'd.  Look for
something like "Ring Answer", I forget the exact details now.

 

  _____  

From: asterisk-users-bounces at lists.digium.com on behalf of Mike
Sent: Thu 2/24/2011 1:41 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] Paging with Polycom 3.3.x

Hi,

 

My phones stopped auto-answering when being paged, since I moved on to
Polycom firmware 3.3.0 (3.3.1 is the same, I tried).  That is with Asterisk
1.6.2.16.

 

I looked at the wiki but nothing I try there works, even if I cut and paste
the same setup.

 

Any one has any idea of what I should change from my old 3.2.3 setup?  My
older phone (501) still using 3.1.6 still auto-answer correctly.

 

Regards,

 

Mike

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110224/690ca3f0/attachment.htm>