[asterisk-users] YELLOW alarm

Albert alberton at wp.pl
Mon Feb 14 06:08:03 CST 2011


Sebastian,

It seems it's working now!

Cable was fine, thought i have added crc4 to span config:
span=1,1,0,ccs,hdb3,crc4
....

Thank you very much for your help and hints! :)
oice:/etc/dahdi# dahdi_scan
[1]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
location=Board ID Switch 0
basechan=1
totchans=31
irq=16
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS


On 14.02.2011 12:29, Albert wrote:voice:/etc/dahdi# cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4

	   1 TE2/0/1/1 Clear (SWEC: MG2)
	   2 TE2/0/1/2 Clear (SWEC: MG2)
	   3 TE2/0/1/3 Clear (SWEC: MG2)
	   4 TE2/0/1/4 Clear (SWEC: MG2)
	   5 TE2/0/1/5 Clear (SWEC: MG2)
	   6 TE2/0/1/6 Clear (SWEC: MG2)
	   7 TE2/0/1/7 Clear (SWEC: MG2)
	   8 TE2/0/1/8 Clear (SWEC: MG2)
	   9 TE2/0/1/9 Clear (SWEC: MG2)
	  10 TE2/0/1/10 Clear (SWEC: MG2)
	  11 TE2/0/1/11 Clear (SWEC: MG2)
	  12 TE2/0/1/12 Clear (SWEC: MG2)
	  13 TE2/0/1/13 Clear (SWEC: MG2)
	  14 TE2/0/1/14 Clear (SWEC: MG2)
	  15 TE2/0/1/15 Clear (SWEC: MG2)
	  16 TE2/0/1/16 HDLCFCS
	  17 TE2/0/1/17 Clear (SWEC: MG2)
	  18 TE2/0/1/18 Clear (SWEC: MG2)
	  19 TE2/0/1/19 Clear (SWEC: MG2)
	  20 TE2/0/1/20 Clear (SWEC: MG2)
	  21 TE2/0/1/21 Clear (SWEC: MG2)
	  22 TE2/0/1/22 Clear (SWEC: MG2)
	  23 TE2/0/1/23 Clear (SWEC: MG2)
	  24 TE2/0/1/24 Clear (SWEC: MG2)
	  25 TE2/0/1/25 Clear (SWEC: MG2)
	  26 TE2/0/1/26 Clear (SWEC: MG2)
	  27 TE2/0/1/27 Clear (SWEC: MG2)
	  28 TE2/0/1/28 Clear (SWEC: MG2)
	  29 TE2/0/1/29 Clear (SWEC: MG2)
	  30 TE2/0/1/30 Clear (SWEC: MG2)
	  31 TE2/0/1/31 Clear (SWEC: MG2)

> On 14.02.2011 12:17, Sébastien BERGER wrote:
>> As I know it's only telco who provide the clock. Then you must configure
>> your span with 1,1,0
>> 1 is as TE (terminal equipment)
>> 0 is as NT (network termination)
>>
>> So, configure your span as TE, be sure telco not use crc4.
>> If already yellow, call your telco and ask him if he provide clock or not.
> 
> This is what i am doing now, span in configured to obtain timiing from
> telco. (span=1,1,0,ccs,hdb3)
> 
>>
>> Just to be sure, verify your E1 cable. It's a crossover ?
> 
> It's out remote location so i dont have direct connection. But thanks
> for hint, i will also check on that.
> 
>>
>> Regards,
>> Sebastien BERGER
>>
>> AB2L
>> +33 (0)367100783
>> sebastien at ab2l.eu
>>
>>
>> Le 14/02/2011 11:50, Albert a écrit :
>>> Hi,
>>>
>>> span 1 - e1 line (15 channels)
>>> span 2 - nothing is connected to 2nd span
>>>
>>> below is also status from proc fs
>>>
>>> ps. i was also trying with timing provided by card (0)
>>> span=1,1,0,ccs,hdb3
>>> ...
>>> but result was the same
>>>
>>>
>>> voice:/tmp# cat /proc/dahdi/1
>>> Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW
>>>
>>>        1 TE2/0/1/1 Clear YELLOW(SWEC: MG2)
>>>        2 TE2/0/1/2 Clear YELLOW(SWEC: MG2)
>>>        3 TE2/0/1/3 Clear YELLOW(SWEC: MG2)
>>>        4 TE2/0/1/4 Clear YELLOW(SWEC: MG2)
>>>        5 TE2/0/1/5 Clear YELLOW(SWEC: MG2)
>>>        6 TE2/0/1/6 Clear YELLOW(SWEC: MG2)
>>>        7 TE2/0/1/7 Clear YELLOW(SWEC: MG2)
>>>        8 TE2/0/1/8 Clear YELLOW(SWEC: MG2)
>>>        9 TE2/0/1/9 Clear YELLOW(SWEC: MG2)
>>>       10 TE2/0/1/10 Clear YELLOW(SWEC: MG2)
>>>       11 TE2/0/1/11 Clear YELLOW(SWEC: MG2)
>>>       12 TE2/0/1/12 Clear YELLOW(SWEC: MG2)
>>>       13 TE2/0/1/13 Clear YELLOW(SWEC: MG2)
>>>       14 TE2/0/1/14 Clear YELLOW(SWEC: MG2)
>>>       15 TE2/0/1/15 Clear YELLOW(SWEC: MG2)
>>>       16 TE2/0/1/16 HDLCFCS YELLOW
>>>       17 TE2/0/1/17 Clear YELLOW(SWEC: MG2)
>>>       18 TE2/0/1/18 Clear YELLOW(SWEC: MG2)
>>>       19 TE2/0/1/19 Clear YELLOW(SWEC: MG2)
>>>       20 TE2/0/1/20 Clear YELLOW(SWEC: MG2)
>>>       21 TE2/0/1/21 Clear YELLOW(SWEC: MG2)
>>>       22 TE2/0/1/22 Clear YELLOW(SWEC: MG2)
>>>       23 TE2/0/1/23 Clear YELLOW(SWEC: MG2)
>>>       24 TE2/0/1/24 Clear YELLOW(SWEC: MG2)
>>>       25 TE2/0/1/25 Clear YELLOW(SWEC: MG2)
>>>       26 TE2/0/1/26 Clear YELLOW(SWEC: MG2)
>>>       27 TE2/0/1/27 Clear YELLOW(SWEC: MG2)
>>>       28 TE2/0/1/28 Clear YELLOW(SWEC: MG2)
>>>       29 TE2/0/1/29 Clear YELLOW(SWEC: MG2)
>>>       30 TE2/0/1/30 Clear YELLOW(SWEC: MG2)
>>>       31 TE2/0/1/31 Clear YELLOW(SWEC: MG2)
>>>
>>> voice:/tmp# cat /proc/dahdi/2
>>> Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS RED
>>>
>>>       32 TE2/0/2/1 Clear RED(SWEC: MG2)
>>>       33 TE2/0/2/2 Clear RED(SWEC: MG2)
>>>       34 TE2/0/2/3 Clear RED(SWEC: MG2)
>>>       35 TE2/0/2/4 Clear RED(SWEC: MG2)
>>>       36 TE2/0/2/5 Clear RED(SWEC: MG2)
>>>       37 TE2/0/2/6 Clear RED(SWEC: MG2)
>>>       38 TE2/0/2/7 Clear RED(SWEC: MG2)
>>>       39 TE2/0/2/8 Clear RED(SWEC: MG2)
>>>       40 TE2/0/2/9 Clear RED(SWEC: MG2)
>>>       41 TE2/0/2/10 Clear RED(SWEC: MG2)
>>>       42 TE2/0/2/11 Clear RED(SWEC: MG2)
>>>       43 TE2/0/2/12 Clear RED(SWEC: MG2)
>>>       44 TE2/0/2/13 Clear RED(SWEC: MG2)
>>>       45 TE2/0/2/14 Clear RED(SWEC: MG2)
>>>       46 TE2/0/2/15 Clear RED(SWEC: MG2)
>>>       47 TE2/0/2/16 HDLCFCS RED
>>>       48 TE2/0/2/17 Clear RED(SWEC: MG2)
>>>       49 TE2/0/2/18 Clear RED(SWEC: MG2)
>>>       50 TE2/0/2/19 Clear RED(SWEC: MG2)
>>>       51 TE2/0/2/20 Clear RED(SWEC: MG2)
>>>       52 TE2/0/2/21 Clear RED(SWEC: MG2)
>>>       53 TE2/0/2/22 Clear RED(SWEC: MG2)
>>>       54 TE2/0/2/23 Clear RED(SWEC: MG2)
>>>       55 TE2/0/2/24 Clear RED(SWEC: MG2)
>>>       56 TE2/0/2/25 Clear RED(SWEC: MG2)
>>>       57 TE2/0/2/26 Clear RED(SWEC: MG2)
>>>       58 TE2/0/2/27 Clear RED(SWEC: MG2)
>>>       59 TE2/0/2/28 Clear RED(SWEC: MG2)
>>>       60 TE2/0/2/29 Clear RED(SWEC: MG2)
>>>       61 TE2/0/2/30 Clear RED(SWEC: MG2)
>>>       62 TE2/0/2/31 Clear RED(SWEC: MG2)
>>>
>>>
>>>
>>> Albert
>>>
>>> On 14.02.2011 11:39, Sébastien BERGER wrote:
>>>> Hello,
>>>>
>>>> Can you say us what is connected in which span ?
>>>>
>>>> span 1 =
>>>> span 2 =
>>>>
>>>> Yellow would say that the span did not receive external clock
>>>>
>>>> Sebastien
>>>>
>>>> AB2L
>>>> +33 (0)367100783
>>>> sebastien at ab2l.eu
>>>>
>>>>
>>>> Le 14/02/2011 11:34, Albert a écrit :
>>>>> Hi guys,
>>>>>
>>>>> I am getting YELLOW alarm on my span with E1 line. Anyone knows what
>>>>> could be the problem ? Below is my config and status...
>>>>>
>>>>> voice:/etc/dahdi# dahdi_hardware -v
>>>>> pci:0000:02:08.0     wct4xxp+     d161:1220 Wildcard TE220 (5th Gen)
>>>>>
>>>>>
>>>>> voice:/etc/dahdi# dahdi_scan
>>>>> [1]
>>>>> active=yes
>>>>> alarms=YEL
>>>>> description=T2XXP (PCI) Card 0 Span 1
>>>>> name=TE2/0/1
>>>>> manufacturer=Digium
>>>>> devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
>>>>> location=Board ID Switch 0
>>>>> basechan=1
>>>>> totchans=31
>>>>> irq=16
>>>>> type=digital-E1
>>>>> syncsrc=0
>>>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>>>> coding_opts=AMI,HDB3
>>>>> framing_opts=CCS,CRC4
>>>>> coding=HDB3
>>>>> framing=CCS
>>>>> [2]
>>>>> <cut>   ....</cut>
>>>>>
>>>>> voice:/etc/dahdi# cat system.conf
>>>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>> span=1,1,0,ccs,hdb3
>>>>> bchan=1-15,17-31
>>>>> dchan=16
>>>>> echocanceller=mg2,1-15,17-31
>>>>>
>>>>> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>>>>> # span=2,0,0,ccs,hdb3,crc4,yellow
>>>>> span=2,0,0,ccs,hdb3
>>>>> bchan=32-46,48-62
>>>>> dchan=47
>>>>> echocanceller=mg2,32-46,48-62
>>>>>
>>>>> # Global data
>>>>>
>>>>> loadzone    = uk
>>>>> defaultzone    = uk
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ps1. I am using DAHDI drivers in version 2.4.0
>>>>>
>>>>> ps2. in attachment screen from dahdi_tool
>>>>>
>>>>> Any help will do.
>>>>>
>>>>> Thanks,
>>>>> Alebert
>>>>>
>>>>>
>>>>> -- 
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>                  http://www.asterisk.org/hello
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>      http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>> -- 
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>                 http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>     http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>> -- 
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>                 http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>     http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> -- 
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 




More information about the asterisk-users mailing list