[asterisk-users] sangoma wanpipe install error

[Moises Silva]

As the error suggest, try checking /var/log/messages for possible hints on
what went wrong.

Make sure you configured the device with wancfg_dahdi script first.

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6
Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com


On Fri, Feb 11, 2011 at 1:47 AM, Roi Stork <roi.stork at gmail.com> wrote:

> Trying to install wanpipe 3.5.18.
>
> No errors during compile. But when I reach the point where wanpipe and
> dahdi_cfg is started, I encountered an error.
>
> Starting WAN Router...
> Loading WAN drivers: wanpipe done.
> Starting up device: wanpipe1
>
>
>        wanconfig: WAN device wanpipe1 driver load failed !!
>                 : ioctl(wanpipe1,ROUTER_SETUP) failed:
>                 :      22 - Invalid argument
>
>
>        Wanpipe driver did not load properly
>        Please check /var/log/wanrouter and
>        /var/log/messages for errors
>
> Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No
> such device
>
> done.
> /etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable
>
> DAHDI_SPANCONFIG failed on span 1: No such device
> or address (6)
>
> Dont know why I still keep getting a 'No such device' error even if the
> device was detected (Sangoma a104de, setup asked to configure/skip the 4
> ports) before the error happened.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110211/51f26056/attachment.htm>