[asterisk-users] Limit # of inbound calls on SIP trunk

[Douglas Mortensen]

Excellent. Do you think these functions would enable me to create rules based on both the concurrent # of inbound and/or outbound calls, or only total # of concurrent calls (agnostic to call direction being inbound vs. outbound)?

Thanks,
-
Doug Mortensen
Network Consultant
Impala Networks
P: 505.327.7300


-----Original Message-----
From: Steve Edwards [mailto:asterisk.org at sedwards.com] 
Sent: Monday, December 19, 2011 5:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Limit # of inbound calls on SIP trunk

On Mon, 19 Dec 2011, Douglas Mortensen wrote:

> I have a system with FreePBX, and as far as I can tell it does not 
> provide a means to limit the number of simultaneous inbound calls on a 
> SIP trunk. Therefore I suspect that I’ll need to do some manual 
> dialplan manipulation.

The GROUP() and GROUP_COUNT() functions and the GOTOIF() application should do the trick.

--
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
Newline                                              Fax: +1-760-731-3000