[asterisk-users] Partner Keys on Innovaphone

[Jonas Kellens]

If Asterisk supports rfc 4235, then it should be able to send this 
caller-information inside the NOTIFY-message, but it does not.

So my question is : does Asterisk 1.6 not support this ? Or am I lacking 
something in my configuration ?

Jonas.


On 12/15/2011 04:51 PM, Danny Nicholas wrote:
>
> BLF as I understand it is controlled by hints;  perhaps I am crossing 
> wires here.  But your usage as stated "expects" the caller ID of a 
> call to go into the hint information
>
> Colleague is leg B
>
> Caller is leg A
>
> You are looking for hint to be populated when leg B is established.
>
> *From:*asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas 
> Kellens
> *Sent:* Thursday, December 15, 2011 9:47 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Partner Keys on Innovaphone
>
> But "blind transfer" has nothing to do with BLF, no ?!
>
> It should work with a normal incoming call, not just a transfer.
>
> Jonas.
>
>
>
> On 12/15/2011 04:42 PM, Danny Nicholas wrote:
>
> AIR this is 10.0 functionality; to "make it work" in the 1.X tree you 
> have to "blind transfer"
>
> *From:*asterisk-users-bounces at lists.digium.com 
> <mailto:asterisk-users-bounces at lists.digium.com> 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Jonas 
> Kellens
> *Sent:* Thursday, December 15, 2011 9:42 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Partner Keys on Innovaphone
>
> Hello,
>
> when using BLF with Asterisk 1.6, I notice that the Caller-ID 
> information is not displayed on the monitoring key of my Innovaphone 
> IP200A.
>
> If the IP-phone of my colleague rings, I should see on my partner key 
> the number of the caller. This is information that is being send in 
> the xml-body of the NOTIFY-message.
>
> I do not see this information in the xml-body of a NOTICE-message from 
> the Asterisk PBX.
>
> Is it not supported ?
>
> Is it supported in 1.8 ? 1.10 ?
>
>
> Kind regards,
> Jonas.
>
>   
>   
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided byhttp://www.api-digital.com  --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>   
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111215/49ba8001/attachment-0001.htm>