[asterisk-users] Populate CDR issues

[Danny Nicholas]

IMO you are trying to circumvent basic Asterisk functionality.  It's your
CDR so you can do what you want with it - I think the answer to this is to
populate another DB with the live call data, then update the CDR from that
after the call has ended (perhaps a daemon).

 

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Harel Cohen
Sent: Tuesday, December 06, 2011 3:16 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Populate CDR issues

 

Hello Everyone,

I didn't get a reply to my problem below so I'm posting again just in case
someone who might be able to help missed my previous post.

Thank You.

****************************************************************************
*********

Hello list,

I'm trying to populate my CDR logs with values which are available after the
call has started (e.g. signalling IP of remote user, media IP, codec etc.).
While CHANNEL function give me all I need for the incoming leg (leg A), I
can't get the relevant values for the outgoing channel. I've tried using the
option 'U' with my dial command (execute subroutine for called channel after
called channel answered but before the call is bridged). While this throws
the correct information to the console it does not populate the CDRs
accordingly.

Note: Asterisk ver is 1.8.7.1 and CDR's are written to MySQL with adaptive
ODBC and the table therein contains the relevant fields.

 

This is the console with 'very-verbose' output for the 'Dial' application
where office_Admin2, IP 192.168.20.222, is calling office_ServerRoom, IP
192.168.20.226. My comments added prefixed by ** and on separate line:

 

** channel here is source channel: SIP/office_Admin2-00000015

[Dec  1 12:14:31]     -- Executing [316 at InternalDP:5]
Dial("SIP/office_Admin2-00000015",
"SIP/office_ServerRoom,,FgU(jump2SetVar)") in new stack

[Dec  1 12:14:31]   == Using UDPTL CoS mark 5

[Dec  1 12:14:31]   == Using SIP RTP CoS mark 5

[Dec  1 12:14:31]     -- Called SIP/office_ServerRoom

[Dec  1 12:14:31]     -- SIP/office_ServerRoom-00000016 is ringing

[Dec  1 12:14:31]     -- SIP/office_ServerRoom-00000016 is ringing

[Dec  1 12:14:33]     -- SIP/office_ServerRoom-00000016 answered
SIP/office_Admin2-00000015

** from here the channel is the destination channel:
SIP/office_ServerRoom-00000016

[Dec  1 12:14:33]     -- Executing [s at jump2SetVar:1]
Gosub("SIP/office_ServerRoom-00000016", "SetVar,postdial,1") in new stack

** This is how I obtain channel information:

** exten =>
postdial,1,Set(CDR(chanoutsigip)=${CHANNEL(peerip)}:${SIPPEER(${CHANNEL(peer
name)},port)}) ; resulting format: <a.b.c.d>:<port>

** same => n,Set(CDR(chanoutmediaip)=${CHANNEL(rtpdest,audio)})

** same => n,Set(CDR(chanoutcodec)=${CHANNEL(audionativeformat)})

[Dec  1 12:14:33]     -- Executing [postdial at SetVar:1]
Set("SIP/office_ServerRoom-00000016",
"CDR(chanoutsigip)=192.168.20.226:5065") in new stack

[Dec  1 12:14:33]     -- Executing [postdial at SetVar:2]
Set("SIP/office_ServerRoom-00000016",
"CDR(chanoutmediaip)=192.168.20.226:23008") in new stack

[Dec  1 12:14:33]     -- Executing [postdial at SetVar:3]
Set("SIP/office_ServerRoom-00000016", "CDR(chanoutcodec)=g729") in new stack

[Dec  1 12:14:33]     -- Executing [postdial at SetVar:4]
Goto("SIP/office_ServerRoom-00000016", "endsub,1") in new stack

[Dec  1 12:14:33]     -- Goto (SetVar,endsub,1)

[Dec  1 12:14:33]     -- Executing [endsub at SetVar:1]
Return("SIP/office_ServerRoom-00000016", "") in new stack

[Dec  1 12:14:33]     -- Executing [s at jump2SetVar:2]
Return("SIP/office_ServerRoom-00000016", "") in new stack

[Dec  1 12:14:33]     -- Executing [s at app_dial_gosub_virtual_context:1]
NoOp("SIP/office_ServerRoom-00000016", "") in new stack

[Dec  1 12:14:33]     -- Auto fallthrough, channel
'SIP/office_ServerRoom-00000016' status is 'UNKNOWN'

[Dec  1 12:14:33]     -- Remotely bridging SIP/office_Admin2-00000015 and
SIP/office_ServerRoom-00000016

 

When call is terminated the relevant fields in the database for
CDR(chanoutsigip), CDR(chanoutmediaip) and CDR(chanoutcodec) are populated
with their default values (typically blank or '-----') and NOT with the
values above.

Am I doing something wrong or is there a different way to populate CDR's
with info from called channel (leg B)?

 

Thank you for your replies.

 

Harel

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111206/8800c5a1/attachment.htm>