[asterisk-users] TE410P hardware problems

[Shaun Ruffell]

On Tue, Aug 02, 2011 at 09:22:46PM -0400, Dave George wrote:
> TE410P card down.
> 
> I have three (3) TE410P in one machine running asterisk with SS7.
> 
> My problems started last week when one of my cards started switching to E1
> every time after reboot.  I set the following in dahdi.conf and that solve
> the problem.  
> 
> /etc/modprobe.d/
> options wct4xxp t1e1override=0x00
> 
> Now all 4 ports on that card is down with Red Alarm.  I tried rebooting the
> machine and restarting dahdi with no luck.  The other two cards are working
> fine.  I put a loop plug the ports and same problem.

Any strange output in dmesg? Best guess is either the card has failed or
it has started to unseat from it's PCI slot. Normally when it starts to
unseat you'll see "Version Synchronization Errors" in dmesg when trying
to load the card.

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org