No subject

Appreciate the kindly help and advise.
Regards
Bilal
---------------------

> 
> Bilal,
> 
> I suggest you turn on logging on your tftp server to see
> what files are actually being requested, and if the the tftp
> server is dishing them out... Try adding a few v's to your
> tftp setup:
> 
> File: /etc/xinetd.d/tftp
> Line to change: server_args = -s /tftpboot -v -v -v
> 
> Look in /var/log/messages for the output. 
> 
> Also, I believe your 7942G has a console/aux port which is
> a serial port, you can learn what is happening as the phone
> boots up with that too. 
> 
> Good Luck! 
> 
> Mark
> 
> 
> On Jun 13, 2011, at 3:02 PM, bilal ghayyad wrote:
> 
> > Dears;
> > 
> > The Asterisk version is 1.8.3.2
> > 
> > The Cisco IP Phone is 7942G and it is running now
> skinny.
> > 
> > The used TFTP is tftp-server which is installed in
> fedora.
> > 
> > I placed the following two files (but look like it was
> not taken from the TFTP, as nothing appeared in the
> messages), but I am able to to ping from the asterisk box to
> the vlan that the Phone is connected, so no problem in the
> reachability:
> > 
> > 
> > SEPB8BEBF22AB62.cnf.xml
> > xmlDefault.CNF.XML
> > 
> > Are the files name correct? Or the Cisco IP Phone
> 7942G are not working fine with Asterisk or the
> tftp-server?
> > 
> > Regards
> > Bilal
> > 
> > --------------------
> > 
> >>> Hi All;
> >>> 
> >>> Can anyone advise if using Cisco IP Phones
> >> 
> >> Which model(s) are you planning to use ?
> >> 
> >> 
> >>> in skinny protocol is fine or not? Or it is
> better to
> >> use it in SIP
> >>> protocol?
> >>> 
> >>> 
> > --------------
> > 
> >> Hi,
> >> 
> >> On 06/13/2011 01:04 PM, bilal ghayyad wrote:
> >>> Can anyone advise if using Cisco IP Phones in
> skinny
> >> protocol is fine or not? Or it is better to use it
> in SIP
> >> protocol?
> >> 
> >> SCCP works better than SIP in my opinion as there
> are more
> >> features.
> >> Check out http://chan-sccp-b.sourceforge.net/
> >>