[asterisk-users] A101DE Sangoma Card in AsteriskNow 1.7.1

[Kaushal Shriyan]

On Mon, Apr 18, 2011 at 11:42 PM, Kaushal Shriyan
<kaushalshriyan at gmail.com>wrote:

> Hi,
>
> I have A101DE Sangoma Card(
> http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html
> )
>
> lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp.
> A200/Remora FXO/FXS Analog AFT card
> [root at asterisk ~]# lspci -vvv -s 03:04.0
> 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS
> Analog AFT card
>     Subsystem: Unknown device a111:3713
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>     Latency: 255 (1250ns min, 3750ns max)
>     Interrupt: pin A routed to IRQ 185
>     Region 0: Memory at fd8f8000 (32-bit, non-prefetchable) [size=32K]
> [root at asterisk ~]#
>
> Please suggest/guide
>
> Thanks
>
> Kaushal
>
> Hi,

I have A101DE Sangoma Card(
http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html
)

[root at asterisk ~]# wanrouter list

Devices currently active:
   wanpipe1


[root at asterisk ~]# wanrouter status

Devices currently active:
    wanpipe1


Wanpipe Config:

Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 185 | 4       | 1    |
N/A | 0         |

Wanrouter Status:

Device name | Protocol | Station | Status        |
wanpipe1    | AFT TE1  | N/A     | Disconnected  |

[root at asterisk ~]# wanrouter hwprobe

-------------------------------
| Wanpipe Hardware Probe Info |
-------------------------------
1 . AFT-A101-SH : SLOT=4 : BUS=3 : IRQ=185 : CPU=A : PORT=1 : HWEC=32 : V=37

Card Cnt: A101-2=1

[root at asterisk ~]#
[root at asterisk ~]# lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97
Audio Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress
200G Series]
01:05.1 Display controller: ATI Technologies Inc Radeon Xpress Series
(RS480)
02:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI
Bridge (rev aa)
03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS
Analog AFT card
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit
Ethernet PCI Express (rev 20)
05:0a.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet
Adapter (rev 11)
[root at asterisk ~]# lspci -vvv -s 03:04.0
03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS
Analog AFT card
    Subsystem: Unknown device a111:3713
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
    Latency: 255 (1250ns min, 3750ns max)
    Interrupt: pin A routed to IRQ 185
    Region 0: Memory at fd8f8000 (32-bit, non-prefetchable) [size=32K]

[root at asterisk ~]#
Please suggest/guide. wanpipe status shows disconnected. When i connect the
PRI to the EPABX it works fine, when i connect it to the Sangoma PRI Card,
it shows RED. Please suggest.

Thanks and Regards,

Kaushal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110419/fee8fe10/attachment.htm>