[asterisk-users] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card

[Tim Nelson]

On Wed, Apr 13, 2011 at 8:07 PM, satish patel < satish_lx at hotmail.com > wrote: 



Try dmesg command 

root at XXXX:~# dmesg | grep -i Sangoma 
[ 2303.473601] WANPIPE(tm) Hardware Support Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc 
[ 2303.481115] WANPIPE(tm) Interface Support Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc 
[ 2303.494824] WANPIPE(tm) Multi-Protocol WAN Driver Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc 
[ 2303.506498] WANPIPE(tm) Socket API Module 3.5.19.0 (c) 1994-2010 Sangoma Technologies Inc 
[ 2303.525334] WANPIPE(tm) WANEC Layer 3.5.19.0 (c) 1995-2006 Sangoma Technologies Inc. 



Hi Satish 



dmesg | grep -i Sangoma does not show anything 



If lspci isn't showing the device, then your board is not recognizing it. Try another slot, and make sure the card is seated 100% tightly into the slot. 


And, of course, make sure the system is powered off while doing this. 99.999% of people already know this, but I've been bitten by the other 0.001% that don't. :-) 


If you're still not showing it, a call to Sangoma support is probably in order. They are top notch. 


--Tim 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110413/93d4d7bd/attachment.htm>