[asterisk-users] MOH on DAHDI PRI Channels

[Danny Nicholas]

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Shariq Khan
Sent: Thursday, April 07, 2011 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] MOH on DAHDI PRI Channels

 

Is it possible to start MOH when calling to DAHDI Channel that has ISDN E1
connected with it. When the called party press hold on his phone then
asterisk start MOH??

 

--


Regards,

Shariq Khan

0333-3501125

 

[Danny Nicholas] 

Question #1

Dial(DAHDI/1/5551212,20,m) will play moh until the other end answers

Question #2

Don't think so since you're asking Asterisk to detect "on hold" from outside
(this might be do-able in a SIP environment, but DAHDI tends to be copper).

Hope this is correct/helps.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110407/0e2d8b93/attachment.htm>