[asterisk-users] dahdi and linux-2.6.38

[Kevin P. Fleming]

On 04/05/2011 02:26 PM, Danny Nicholas wrote:
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> covici at ccs.covici.com
> Sent: Tuesday, April 05, 2011 2:22 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] dahdi and linux-2.6.38
>
>
> Danny Nicholas<danny at debsinc.com>  wrote:
>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>>> covici at ccs.covici.com
>>> Sent: Tuesday, April 05, 2011 1:53 PM
>>> To: asterisk-users at lists.digium.com
>>> Subject: [asterisk-users] dahdi and linux-2.6.38
>>>
>>> Under linux-2.6.38 I was able to compile and install dahdi, however when
>>> I ran dahdi_cfg -vv, I got an invalid argument on my fxs port.  I have
>>> an old 400P card with one FXS and one FXO module.  I have
>>> dahdi-trunk r9868 and dahdi-tools-trunk  8670.
>>>
>>> How can I get this to work correctly?
>>>
>>> Thanks in advance for any ideas.
>>
> <  You installed libpri ?
>>> I don't have any pri's.
>
> I'd check the dmesg output - AFAIK you need libpri as a backbone for DAHDI
> (at least on some kernels).

This is not true. libpri is used only in userspace, and has nothing to 
do with anything in the kernel.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at www.digium.com & www.asterisk.org