[asterisk-users] dahdi and linux-2.6.38

[Danny Nicholas]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
covici at ccs.covici.com
Sent: Tuesday, April 05, 2011 2:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] dahdi and linux-2.6.38


Danny Nicholas <danny at debsinc.com> wrote:

>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>> covici at ccs.covici.com
>> Sent: Tuesday, April 05, 2011 1:53 PM
>> To: asterisk-users at lists.digium.com
>> Subject: [asterisk-users] dahdi and linux-2.6.38
>> 
>> Under linux-2.6.38 I was able to compile and install dahdi, however when
>> I ran dahdi_cfg -vv, I got an invalid argument on my fxs port.  I have
>> an old 400P card with one FXS and one FXO module.  I have
>> dahdi-trunk r9868 and dahdi-tools-trunk  8670.
>> 
>> How can I get this to work correctly?
>> 
>> Thanks in advance for any ideas.
> 
< You installed libpri ?
>>I don't have any pri's.

I'd check the dmesg output - AFAIK you need libpri as a backbone for DAHDI
(at least on some kernels).