[asterisk-users] dialplan is not finding my number asterisk 1.8.3

[Steve Murphy]

Idea:

If something is corrupting your dialplan, then this should
reveal the extent of the corruption:

You might, when the system is working properly, do a:

asterisk -rx "dialplan show" > somefile1

and then, when you are having problems, do a:

asterisk -rx "dialplan show" > somefile2
diff -u somefile1 somefile2

and see if this reveals anything juicy.

murf



On Tue, Apr 5, 2011 at 5:44 AM, Jerry Geis <geisj at pagestation.com> wrote:

> Jerry Geis wrote:
>
>> I am calling from a polycom phone into asterisk ( 1105 ) on a PC with a
>> speaker attached.
>>
>> When asterisk first starts this works. In fact it works for some time.
>> Then it just stops with this error on the CLI.
>>
>> [Apr  4 15:10:21] NOTICE[4357]: chan_sip.c:21358 handle_request_invite:
>> Call from 'mndemo_to_mediaport105' to extension '1105' rejected because
>> extension not found in context 'smvoice-mediaport'.
>>
>> When doing the "dialplan show" it clearly in the context.
>>
>> [ Context 'smvoice-mediaport' created by 'pbx_config' ]
>>  '1105' =>         1. Goto(smvoice-mediaport-public-address,s,1)
>> [pbx_config]
>>
>>
>> Its telling me it cannot find it. Its there - the dialplan shows its
>> there.
>> When I stop and start it works again for a little while.
>> Matter of fact I just issued "dialplan reload" and calling into 1105 works
>> again.
>>
>> Whats up? How do I get this to be consistent?
>>
>> Jerry
>>
>>
>>  I just looked in my extensions.conf and I do not have
> extenpatternmatchnew at all. My understanding is that
> it is off by default.
>
> my sip.conf has:
> register => mndemo_to_mediaport105:secret at mndemo
>
> ; Description:
> [mndemo_to_mediaport105]
> type=friend
> defaultname=mndemo_to_mediaport105
> username=mndemo_to_mediaport105
> secret=secret
> disallow=all
> allow=ulaw
> allow=alaw
> allow=gsm
> rtptimeout=60
> host=192.168.1.58
> context=smvoice-mediaport
>
>
> I was not aware I needed another context of :
>
> [mndemo_to_mediaport105]
> include => smvoice-mediaport
>
>
> The context is set above in sip.conf and that is what the CLI above is
> showing its using.
>
>
> Also my extensions.conf section is :
>
> ------
> [smvoice-mediaport-public-address]
> exten => s,1,System(/home/silentm/bin/smfunctions -stop)
> exten => s,n,Playback(beep)
> exten => s,n,Dial(Console/dsp)
> exten => s,n,Hangup
> exten => h,1,System(/home/silentm/bin/smfunctions -start)
>
> [smvoice-mediaport]
> exten => public_address,1,Goto(smvoice-mediaport-public-address,s,1)
>
> #include "/etc/asterisk/express.dnis.conf"
>
> ------
> where express.dnis.conf has:
> ; Phone Caller ID & DNIS Manager screen
>
> ; MMPCGA    : VISUAL PC ROOM 105             - exten =>
> 1105,1,Goto(smvoice-mediaport-public-address,s,1)
>
> -------
> Here is a call that works:
>  == Using SIP RTP CoS mark 5
>   -- Executing [1105 at smvoice-mediaport:1]
> Goto("SIP/mndemo_to_mediaport105-00000003",
> "smvoice-mediaport-public-address,s,1") in new stack
>   -- Goto (smvoice-mediaport-public-address,s,1)
>   -- Executing [s at smvoice-mediaport-public-address:1]
> System("SIP/mndemo_to_mediaport105-00000003", "/home/silentm/bin/smfunctions
> -stop") in new stack
>   -- Executing [s at smvoice-mediaport-public-address:2]
> Playback("SIP/mndemo_to_mediaport105-00000003", "beep") in new stack
>   -- <SIP/mndemo_to_mediaport105-00000003> Playing 'beep.gsm' (language
> 'en')
>   -- Executing [s at smvoice-mediaport-public-address:3]
> Dial("SIP/mndemo_to_mediaport105-00000003", "Console/dsp") in new stack
> << Call placed to 'dsp' on console >> << Auto-answered >>    -- Called dsp
>   -- ALSA/dummy answered SIP/mndemo_to_mediaport105-00000003
>   -- Executing [h at smvoice-mediaport-public-address:1]
> System("SIP/mndemo_to_mediaport105-00000003", "/home/silentm/bin/smfunctions
> -start") in new stack
> << Hangup on console >>  == Spawn extension
> (smvoice-mediaport-public-address, s, 3) exited non-zero on
> 'SIP/mndemo_to_mediaport105-00000003'
> ------
>
>
> As I mentioned starting asterisk all this works. There is some random time
> later - perhaps days where it then stops
> finding the exten.
>
> Is there something I have wrong in the config above?
>
> Jerry
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 

Steve Murphy

ParseTree Corporation

57 Lane 17

Cody, WY 82414

✉  murf at parsetree.com

☎ 307-899-5535
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110405/66165117/attachment.htm>