[asterisk-users] Use modprobe to find E1/T1 jumper setting onPRI card

Lee, John (Sydney) John.Lee at compuware.com
Wed Sep 29 02:52:50 CDT 2010


Do you mean that if I could define 30 channels in span 1 for example, then span 1 is set to E1?

If not, then it is T1.

 

________________________________

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Carlos Chavez
Sent: Wednesday, 29 September 2010 4:12 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Use modprobe to find E1/T1 jumper setting onPRI card

 

Simple enough.  If your card says it has 30 ports then it is on, if it only says 24 it is off. 

On Wed, 29 Sep 2010 12:06:30 +1000, Lee, John (Sydney) wrote 
> Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? 
> I want to find out the jumper settings on the card without opening the box which will cause down time. 
>   
> Thanks. 


-- 
Carlos Chavez 
Director de Tecnología 
Telecomunicaciones Abiertas de México S.A. de C.V. 
Tel: +52-55-91169161 Ext 2001 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100929/035c9ef9/attachment-0001.htm 


More information about the asterisk-users mailing list