[asterisk-users] How to test BIG traffic throughDAHDI/WANPIPEinterfaces

Ingmar Steen i.steen at teleknowledge.nl
Fri Sep 24 06:12:40 CDT 2010


Hi,

 

We usually stress test with asterisk using dialplans like:

 

[sipp]

exten => service,1,1,Dial(DAHDI/r1/12345678)

 

[incoming-1]

exten => 12345678,1,Dial(DAHDI/r2/12345678)

 

[incoming-2]

exten => 12345678,1,Answer()

exten => 12345678,n,WaitMusicOnHold(30)

exten => 12345678,n,HangUp()

 

The sipp peer is configured with context=sipp, DAHDI group 1 (spans 1-4)
has context=incoming-1, DAHDI group 2 (spans 5-8) has
context=incoming-2.

 

By letting SIPp set up a call it will dial out on the first group which
is looped back to the second group which then plays hold music for 30
seconds.

 

Met vriendelijke groet,

Ingmar Steen

Teleknowledge

 

Van: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] Namens Danny Dias
Verzonden: vrijdag 24 september 2010 12:38
Aan: Asterisk Users Mailing List - Non-Commercial Discussion
Onderwerp: Re: [asterisk-users] How to test BIG traffic
throughDAHDI/WANPIPEinterfaces

 

ummm but how do you do that?

SIPp is only for SIP calls...i need to check in some way the dahdi
driver, i need in someway stress de card, is that possible? may be it
has no sence at all :(

 

Thanks!

 

2010/9/24 Ingmar Steen <i.steen at teleknowledge.nl>

Hi DD,

 

We usually use loopback cables and use the open source SIP test tool
"SIPp" to initiate SIP calls that are sent from one group of 4 ports to
another group of 4 ports.

 

Met vriendelijke groet,

Ingmar Steen

Teleknowledge

 

Van: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] Namens Danny Dias
Verzonden: vrijdag 24 september 2010 11:05
Aan: Asterisk Users Mailing List - Non-Commercial Discussion
Onderwerp: [asterisk-users] How to test BIG traffic through
DAHDI/WANPIPEinterfaces

 

Hello Community,

 

I need to test or simulate many calls through dahdi/wanpipe, i have a
Sangoma A108D, and i need to test the stability of the
card/drivers/firmwares with a test environment, do you think is
possible?

 

What should i do? using some loopback cable maybe?

 

Thanks in advance

 

DD  


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100924/c42e4e3e/attachment.htm 


More information about the asterisk-users mailing list