[asterisk-users] Astribank Configuration Issues

Tzafrir Cohen tzafrir.cohen at xorcom.com
Thu Oct 28 03:55:07 CDT 2010


On Wed, Oct 27, 2010 at 05:37:15PM -0500, Don Kelly wrote:
> I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX
> 2.8.0.2.
> 
>  
> 
> We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we
> had it working for a while with one NT PRI and one TE PRI and, in the
> process of trying to configure another PRI, I ran into a couple problems.
> 
>  
> 
> (1) As my configuration changes didn't seem to affect the Astribank, I
> power-cycled it. I found that it doesn't reload firmware automatically when
> it's connected. I can force it to load, but am missing something to reload
> automatically.

What's the output of:

dahdi_hardware -v
lsdahdi

Do you have fxload installed?

> 
>  
> 
> (2) I would appreciate a step-by-step suggestion of how I can make
> configuration changes that propagate properly to the Astribank.
> 
>  
> 
> (3) I'd like to know if it's possible to determine what configuration has
> been loaded into the Astribank without visiting the site and looking at the
> lights.

There's practically no configuration in the Astribank itself. There is
firmware that gets loaded to it at startup, as it is not saved on the
Astribank itself. But the configuration is on your system.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir



More information about the asterisk-users mailing list