[asterisk-users] B410P - BRI NT 100 Ohm terminator

[Shaun Ruffell]

On 10/23/2010 07:07 AM, Olivier wrote:
> Hi,
> 
> My set up is :
> Asterisk with B410P in NT mode  <-------------cat5 straight cable
> ----------------> Another PBX in TE mode
> 
> Is the 100 Ohm terminator you can find on B410P boards, necessary when
> connecting in NT mode to another PBX (set in TE mode) ?
> 

If you have it set up in a point-to-point mode, you do not need the
termination.  It is required when you are daisy chaining devices (like
when using point-to-multipoint i.e. you are connecting several ISDN
phones to one B410P in NT mode).

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org