[asterisk-users] Audiocodes firmware

[Mark Deneen]

On Thu, Oct 14, 2010 at 11:46 PM, Mark Murawski
<markm-lists at intellasoft.net> wrote:
> Crazy.  What do you plan on using for an ATA now?
>
> The problems I'm having are getting 500 "Server Internal Error" on just
> about every other call placed out of this mp-118.  The box has been
> installed and in use for quite some time and recently started having
> problems.  Reboots, etc don't make a difference.  I noticed it had newer
> firmware than what I had on some other boxes that had no issues whatsoever.
> I do have a 5.80 firmware I had downloaded a while back and put that on.
> Now the internal server errors are happening on 70-80% of sip->pstn calls.
> pstn->sip calls seem to be coming in just fine.
>
> Ever since I did the firmware downgrade, now my ssh sessions to the box get
> disconnected after about 30 seconds with invalid packet errors.
>
> I've had problems with earlier firmware as well... once the 5.x firmware
> started shipping on audiocodes it seemed they were just about DOA.  The web
> interface worked but nothing else worked right.  Perfectly working
> configurations on other boxes that were copied to the new boxes with new
> firmware would just fail in various ways... disconnect supervision not
> working, internal routing not working.  Finally I managed to get a hold of
> the 5.80 firmware which got rid of all those problems.
>
> Now I'm stuck again.  I have a box in service that's having problems and I
> can't get new firmware.

This doesn't sound like something which firmware would fix, especially
if it had been running fine before.  It sounds like either the mp-118
is failing or you have a damaged cable.

-M