[asterisk-users] minimum card for dahdi timing source ?

[Shaun Ruffell]

On 10/2/10 11:24 AM, mancyborg at gmail.com wrote:
> for a vicidial server which uses only voip, which is the minimum
> telephony card which would provide the required clock timing source
> for conferences to work properly ?

My recommendation would be to use DAHDI 2.4.0  Just having DAHDI loaded 
is enough to provide timing / mix conferences without any other 
configuration (i.e., no need to load dahdi_dummy).  If your server can 
keep accurate wall time, then it will be able to provide adequate timing 
/ mixing for VOIP.

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org