[asterisk-users] No translator path exists for channel type DAHDI (native 76) to 256

[Danny Dias]

Hello,

We are having issues with a NEW Sangoma A108D:

    -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0",
"DAHDI/g0/691918892|30|m") in new stack
[Oct  1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator
path exists for channel type DAHDI (native 76) to 256
[Oct  1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 58 - Bearer capability not available)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [691918892 at pbx1:2] Hangup("SIP/xtravoip200-009d24b0", "")
in new stack
  == Spawn extension (pbx1, 691918892, 2) exited non-zero on
'SIP/xtravoip200-009d24b0'

wanrouter status:

wanrouter status

Devices currently active:
    wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 wanpipe8


Wanpipe Config:

Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe2    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe3    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe4    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe5    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe6    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe7    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |
wanpipe8    | N/A          | A101/1D/A102/2D/4/4D/8| 17  | 4       | 1    |
N/A | 0         |

Wanrouter Status:

Device name | Protocol | Station | Status        |
wanpipe1    | AFT TE1  | N/A     | Connected     |
wanpipe2    | AFT TE1  | N/A     | Disconnected  |
wanpipe3    | AFT TE1  | N/A     | Disconnected  |
wanpipe4    | AFT TE1  | N/A     | Disconnected  |
wanpipe5    | AFT TE1  | N/A     | Disconnected  |
wanpipe6    | AFT TE1  | N/A     | Disconnected  |
wanpipe7    | AFT TE1  | N/A     | Disconnected  |
wanpipe8    | AFT TE1  | N/A     | Disconnected  |

root at Sangoma-Testing:/etc/asterisk# wanpipemon -i w1g1 -c Ta

***** w1g1: E1 Alarms (Framer) *****

ALOS:    OFF    | LOS:    OFF
RED:    OFF    | AIS:    OFF
OOF:    OFF    | RAI:    OFF

***** w1g1: E1 Alarms (LIU) *****

Short Circuit:    OFF
Open Circuit:    OFF
Loss of Signal:    OFF


***** w1g1: E1 Performance Monitoring Counters *****

Line Code Violation    : 187
Far End Block Errors    : 0
CRC4 Errors        : 0
FAS Errors        : 0


Rx Level    : > -2.5db


root at Sangoma-Testing:/etc/asterisk# asterisk -rx 'pri show spans'
PRI span 1/0: Provisioned, Up, Active
PRI span 2/0: Provisioned, In Alarm, Down, Active
PRI span 3/0: Provisioned, In Alarm, Down, Active
PRI span 4/0: Provisioned, In Alarm, Down, Active
PRI span 5/0: Provisioned, In Alarm, Down, Active
PRI span 6/0: Provisioned, In Alarm, Down, Active
PRI span 7/0: Provisioned, In Alarm, Down, Active
PRI span 8/0: Provisioned, In Alarm, Down, Active

What's happening?

Hope you can help me

Regards!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101001/d16b5c9f/attachment.htm