[asterisk-users] HA8 + B400M not configured with genconf_parameters

[Olivier]

Hi,

On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18,
I inserted a new Digium HA8 + B400M card.
My usual installation fails.


I can see it listed :
# lspci -n | grep d161
01:0b.0 0200: d161:8007 (rev 11)

# lspci -vn
01:0b.0 0200: d161:8007 (rev 11)
        Subsystem: d161:8007
        Flags: medium devsel, IRQ 22
        I/O ports at d400 [size=256]
        Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 20020000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2
        Kernel modules: wctdm24xxp

# lsdahdi
# modprobe wctdm24xxp
# dahdi_genconf -v modules
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/modules
# cat modules
# Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on
Fri Nov 26 12:02:11 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
wctdm24xxp
# dahdi_genconf -v system
Default parameters from /etc/dahdi/genconf_parameters
Empty configuration -- no spans
Generating /etc/dahdi/system.conf


Is there something I could do to change this ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101126/6af81962/attachment.htm