[asterisk-users] Problem When Using Polycom with 2 Lines

Ryan Wagoner rswagoner at gmail.com
Mon Nov 15 07:22:34 CST 2010


On Mon, Nov 15, 2010 at 6:05 AM, Dan Journo
<dan at keshercommunications.com> wrote:
> Hi,
>
>
>
> Has anyone had a problem setting up two registrations (on the same Asterisk
> server) on one Polycom phone?
>
> When the user tries to make a call on the 2nd line, it works fine.
>
>
>
> But when they try the first line, the CLI says:-
>
>
>
> Using INVITE request as basis request -
> 9f5fe9a5-215d0f3a-b2fbe6b7 at 192.168.1.138
>
> Found peer client _202' <--- Which is incorrect, it should be client_201.
>
> And then:
>
> [2010-11-15 10:46:29] WARNING[26082]: chan_sip.c:9063 check_auth: username
> mismatch, have < client _202>, digest has < client _201>
>
> [2010-11-15 10:46:29] NOTICE[26082]: chan_sip.c:15079 handle_request_invite:
> Failed to authenticate user " client line 1" <sip: client
> _201 at sipserverip>;tag=E3231B61-69F3BDD6
>
>
>
> The IP and port for client_201 and client _202 are the same.
>
>
>
> Any ideas?
>
> Thanks
>
> Dan
>

I have a Polycom 550 with 2 lines registered to Asterisk 1.8. I'm
using extensions 2000 and 2001. It worked with Asterisk 1.6.2 as well.
I do use FreePBX to configure Asterisk.

Ryan



More information about the asterisk-users mailing list