[asterisk-users] How to use one single IP as origination

[Mike]

See  bindaddr here:
http://www.voip-info.org/wiki/view/Asterisk+config+sip.conf

 

That should do exactly what you want.

 

Regards,

 

Mike

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of CDR
Sent: Sunday, May 30, 2010 10:06
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] How to use one single IP as origination

 

I have an Asterisk with multiple IP's, on the same subnet. When a call comes
in, I need to send it back out via SIP, but need that only one IP is used as
originating IP for all calls.
For example
machines has
192.168.50.3
192.168.50.4
192.168.50.5
....
but when I originate the second leg of a call,  the IP address that is
supposed to be read as source IP must be 192.168.50.5, regardless of how the
call arrived.

How do I do that?



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100531/d4d1fd57/attachment.htm