[asterisk-users] Dahdi PRI T1 Setup for TE210P

Al Grims algrims at gmail.com
Sun May 30 23:31:18 CDT 2010


Hello,

I have been struggling with the configuration of this card on my box.
I have a T1 line and I am trying to setup asterisk with it.
I followed all the instructions and I still see a blinking red light on the
card.
I use fedora 12.

If everything is fine should I see a green line when I plug in the T1 line ?
I want to isolate the issue so I di not start asterisk.  When I run asterisk
I get red alarms on all the channels.

Thanks for any help.  I have sent 2 days on this and this is what I did:


1. I installed the card.
2. libpri-1.4.11 - dahdi-linux-complete-2.3.0+2.3.0 - dahdi-tools-2.3.0
3. dahdi_hardware: pci:0000:01:06.0     wct4xxp+     d161:0210 Wildcard
TE210P
4. cat /proc/dahdi/1 :cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" B8ZS/ESF BLUE RED

       1 TE2/0/1/1 Clear RED
       2 TE2/0/1/2 Clear RED
       3 TE2/0/1/3 Clear RED
       4 TE2/0/1/4 Clear RED
       5 TE2/0/1/5 Clear RED
       6 TE2/0/1/6 Clear RED
       7 TE2/0/1/7 Clear RED
       8 TE2/0/1/8 Clear RED
       9 TE2/0/1/9 Clear RED
      10 TE2/0/1/10 Clear RED
      11 TE2/0/1/11 Clear RED
      12 TE2/0/1/12 Clear RED
      13 TE2/0/1/13 Clear RED
      14 TE2/0/1/14 Clear RED
      15 TE2/0/1/15 Clear RED
      16 TE2/0/1/16 Clear RED
      17 TE2/0/1/17 Clear RED
      18 TE2/0/1/18 Clear RED
      19 TE2/0/1/19 Clear RED
      20 TE2/0/1/20 Clear RED
      21 TE2/0/1/21 Clear RED
      22 TE2/0/1/22 Clear RED
      23 TE2/0/1/23 Clear RED
      24 TE2/0/1/24 HDLCFCS RED

5. dahdi_scan
[1]
active=yes
alarms=BLU/RED
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=1
totchans=24
irq=22
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[2]
active=yes
alarms=RED
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=25
totchans=24
irq=22
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF

    <asterisk-users at lists.digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100531/72048aef/attachment.htm 


More information about the asterisk-users mailing list