[asterisk-users] Callerid with DAHDI

[Daniel Bareiro]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi, Tzafrir.

On Thu, May 20, 2010 at 09:58:26 -0300, Tzafrir Cohen wrote:

>> I'm testing a telephone connected to FXS port of a Sangoma A200 card.
>> But I'm observing that callerid is not working. The configuration
>> that I'm using in chan_dahdi.conf is the following one:

>> - ---------------------------------------------------------------------
>> ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
>> ;autogenrated on 2010-05-11
>> ;Dahdi Channels Configurations
>> ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
>> 
>> [trunkgroups]
>> 
>> [channels]
>> language=es
>> defaultzone=es
>> usecallerid=yes
>> hidecallerid=no
>> callwaiting=no
>> threewaycalling=yes
>> transfer=yes
>> echocancel=yes
>> echotraining=yes
>> inmediate=no
>> 
>> ; DGB - 20100322
>> busydetect=yes
>> busycount=3
>> 
>> 
>> ;Sangoma AFT-A200 [slot:8 bus:1 span:1]  <wanpipe1>
>> context=from-internal
>> group=1
>> echocancel=yes
>> signalling = fxo_ks
>> channel => 1
>> mailbox=300 at voicemail
>> callerid="Jane Doe" <300>

> The 'mailbox' and 'callerid' settings only affect channels 2-4, and
> not channel 1. Is that intentoinal?

Hmmm ... then I just found out "mailbox" and "callerid" apply from where
I put it and that its location is not trivial. Should these be over
"channel"? Putting both under "context" I see that it works.


Thanks for your reply.

Regards,
Daniel

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkv1ZSYACgkQZpa/GxTmHTfHwACeKO9EHjtIoe+A5/UP+/KntPwg
thoAn1EQMfSksCMgqSUUh63SNYlIjanX
=wFrb
-----END PGP SIGNATURE-----